11 material differences · fewer than 12
Tractor oneDeutz-Fahr IN-trac 6.60 Turbo1986–1991No measured PTO figureTractor twoFiat 1300 Super (DT) (Fiat)1978–1981No measured PTO figure
Which should you choose?
Read our verdict on the IN-trac 6.60 Turbo and the 1300 Super (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | IN-trac 6.60 Turbo | 1300 Super (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 148 hp | 147.9 hp | — |
| Engine declared | KHD BF6L 913 | O.M.-FIAT CP-3/100 Var.17 | differs |
| Displacement declared | 6.13 L | 7.41 L | +21% 1300 Super (DT) |
| Maximum torque declared | 395 lb·ft · 535 N·m | 348 lb·ft · 472 N·m | +13% IN-trac 6.60 Turbo |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 15.5 mph · 25 km/h | differs |
| Clutch declared | Hydraulic clutch | pedal-operated dry single-disc clutch with 355,6 mm disc diameter | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 14.8 gpm · 56.0 L/min | 12.0 gpm · 45.5 L/min | +23% IN-trac 6.60 Turbo |
| Pressure declared | — | 2,901–3,336 psi · 200–230 bar | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 13,889 lb · 6,300 kg | 11,155 lb · 5,060 kg | +25% IN-trac 6.60 Turbo |
| Maximum permissible mass declared | 22,046 lb · 10,000 kg | — | — |
| Wheelbase declared | 106.4 in · 2,703 mm | 108.3 in · 2,750 mm | — |
| Length declared | 204.7 in · 5,199 mm | 187.8 in · 4,770 mm | +9% IN-trac 6.60 Turbo |
| Width declared | 94.1 in · 2,390 mm | 85.4–109.1 in · 2,170–2,770 mm | differs |
| Ground clearance declared | 22.8 in · 580 mm | 26.0 in · 660 mm | +14% 1300 Super (DT) |
| Turning radius, braked declared | — | 14.4 ft · 4.40 m | — |
| Fuel tank declared | 285.3 qt · 270 L | 216.6 qt · 205.0 L | +32% IN-trac 6.60 Turbo |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz-Fahr IN-trac 6.60 Turbo sources
- Source: Traktorenlexikon, “Deutz-Fahr IN-trac 6.60 turbo”
- Source: Traktorenlexikon, “Deutz-Fahr DX 160”
Fiat 1300 Super (DT) (Fiat) sources
- Source: Traktorenlexikon, “Fiat 1300-S/1300-S DT”
- Source: Traktorenlexikon, “Someca 1300 S”