• Rigid chassis
  • WhichTractor size: Utility
  • No lab test on file
  • 1982–1984

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Deutz-Fahr D 6007 (C) specs: hp, weight, years

KHD F3L 913 three-cylinder diesel. The manufacturer claimed 56.26 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

56.26 hp

41.95 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Deutz-Fahr D 6007”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
5,313 lb
3-point lift
5,291 lb
Top speed
15.5–18.6 mph

Deutz-Fahr D 6007 (C) specs: key facts

  • The Deutz-Fahr D 6007 (C) was built from 1982 to 1984.

  • The Deutz-Fahr D 6007 (C) has a claimed engine power (gross or net not stated) of 41.95 kW (56.26 hp); it has no measured PTO figure.

  • The Deutz-Fahr D 6007 (C) was offered in two-wheel-drive and four-wheel-drive versions.

  • The Deutz-Fahr D 6007 (C) has a KHD F3L 913 engine, a 3-cylinder 3.06 L diesel unit.Source 2

  • The Deutz-Fahr D 6007 (C) weighs 2,410 kg (5,313 lb) unladen.

  • The Deutz-Fahr D 6007 (C) has a rear PTO running at 540/1000 rpm.

  • The three-point hitch of the Deutz-Fahr D 6007 (C) lifts 2,400 kg (5,291 lb) at the lower-link ends.

Source · Traktorenlexikon, “Deutz-Fahr D 6007”

Illustration of the 1982–1984 Deutz-Fahr D 6007 (C), a 56 hp farm tractor, four-wheel-drive version, a drawing generated from its specification record
Illustration — not a photograph · four-wheel-drive version

How much horsepower does a D 6007 (C) have?

The only figure for the D 6007 (C) is 56.26 hp (41.95 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
56.26 hp

Source · Traktorenlexikon, “Deutz-Fahr D 6007”

What engine is in a D 6007 (C)?

A D 6007 (C) has a KHD F3L 913, a 3-cylinder 3.06 L diesel engine.

Engine — D 6007 (C) engine specifications
Make & modelKHD F3L 913Source 2
Cylinders3, air-cooledSource 2
Displacement187.0 ci · 3.06 LSource 2
Max torque145 lb·ft · 196 N·m @ 1,650 rpm
Electrical system12 V

Source · Traktorenlexikon, “Deutz-Fahr D 6007”

How much will a D 6007 (C) lift?

A D 6007 (C) lifts 5,291 lb (2,400 kg) at the lower-link ends.

Hydraulics & PTO — D 6007 (C) hydraulics and PTO specifications
SystemOpen centre
Lift at ends5,291 lb · 2,400 kg
Rear PTO540/1000 rpm

Source · Traktorenlexikon, “Deutz-Fahr D 6007”

What transmission does a D 6007 (C) have?

Transmission specifications for the D 6007 (C) are below.

Transmission — D 6007 (C) transmission specifications
ClutchIndependent dry double clutch
BrakesPedal operated dry Girling-GMPD disc brake acting on differential side shafts
SteeringMechanical ZF Gemmer steering
Top speed15.5–18.6 mph · 25–30 km/hthe article lists alternatives

Source · Traktorenlexikon, “Deutz-Fahr D 6007”

How much does a D 6007 (C) weigh?

A D 6007 (C) weighs 5,313 lb (2,410 kg) unladen.

Weights & dimensions — D 6007 (C) weights and dimensions
Unladen weight5,313 lb · 2,410 kgtwo-wheel-drive version
Maximum permissible mass8,818 lb · 4,000 kg
Maximum front axle load3,417 lb · 1,550 kg
Maximum rear axle load6,614 lb · 3,000 kg
Wheelbase78.5 in · 1,995 mmtwo-wheel-drive version
Length140.6 in · 3,570 mm
Width74.0 in · 1,880 mm
Height96.5 in · 2,450 mm
Ground clearance18.9 in · 480 mmtwo-wheel-drive version
Front track54.7–74.4 in · 1,390–1,890 mmtwo-wheel-drive version
Rear track59.8–64.8 in · 1,520–1,646 mm
Turning radius, braked12.9 ft · 3.93 m

Source · Traktorenlexikon, “Deutz-Fahr D 6007”

What oil does a D 6007 (C) take, and how much?

A D 6007 (C) engine takes 9.0 qt (8.5 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

D 6007 (C) fluid capacities, grades and service intervals
SystemCapacity
Engine oil9.0 qt · 8.5 LSource: Traktorenlexikon, “Deutz-Fahr D 6007” · single source, not independently verified
Transmission19.0 qt · 18 LSource: Traktorenlexikon, “Deutz-Fahr D 6007” · single source, not independently verified
Hydraulic14.8 qt · 14 LSource: Traktorenlexikon, “Deutz-Fahr D 6007” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

Which tractors compare with a D 6007 (C)?

Within 10% of its 56.26 hp of claimed engine power, the same type, and first built within 15 years of it.

Common questions about the Deutz-Fahr D 6007 (C)

Is a D 6007 (C) two-wheel drive or four-wheel drive?

The Deutz-Fahr D 6007 (C) was offered in two-wheel-drive and four-wheel-drive versions.

What PTO does a D 6007 (C) have?

A D 6007 (C) has a 540/1000 rpm rear PTO.

Sources and how this page was built

Compiled from Traktorenlexikon, “Fendt Farmer 260 S/SA”; and Traktorenlexikon, “Deutz-Fahr D 6007”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Deutz-Fahr D 6007 — CC BY-SA 4.0, WIKIBOOKS-TL-88116 · revision 1073466. Wikibooks contributors (Traktorenlexikon). Original document
  2. Traktorenlexikon: Fendt Farmer 260 S/SA — CC BY-SA 4.0, WIKIBOOKS-TL-66565 · revision 890775. Wikibooks contributors (Traktorenlexikon). Original document