8 material differences · fewer than 12
Tractor oneDeutz-Fahr D 6007 (C)1982–1984No measured PTO figureTractor twoJ.I. Case 7701969–1973No measured PTO figure
Which should you choose?
Read our verdict on the D 6007 (C) and the 770 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | D 6007 (C) | 770 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 56.26 hp | 56.2 hp | — |
| Engine declared | KHD F3L 913 | CASE A 267 | differs |
| Displacement declared | 3.06 L | — | — |
| Maximum torque declared | 145 lb·ft · 196 N·m | — | — |
| Transmission | |||
| Top speed declared | 15.5–18.6 mph · 25–30 km/h | 15.5–18.6 mph · 25–30 km/h | — |
| Clutch declared | Independent dry double clutch | — | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | — | 16.0 gpm · 60.6 L/min | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 5,313 lb · 2,410 kg | 9,050 lb · 4,105 kg | +70% 770 |
| Maximum permissible mass declared | 8,818 lb · 4,000 kg | — | — |
| Wheelbase declared | 78.5 in · 1,995 mm | 101.0 in · 2,565 mm | +29% 770 |
| Length declared | 140.6 in · 3,570 mm | 153.0 in · 3,886 mm | +9% 770 |
| Width declared | 74.0 in · 1,880 mm | 88.0 in · 2,235 mm | +19% 770 |
| Ground clearance declared | 18.9 in · 480 mm | 15.0 in · 381 mm | +26% D 6007 (C) |
| Turning radius, braked declared | 12.9 ft · 3.93 m | 11.4 ft · 3.48 m | +13% D 6007 (C) |
| Fuel tank declared | 74.0 qt · 70 L | 200.0 qt · 189.3 L | +170% 770 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz-Fahr D 6007 (C) sources
- Source: Traktorenlexikon, “Deutz-Fahr D 6007”
- Source: Traktorenlexikon, “Fendt Farmer 260 S/SA”
J.I. Case 770 sources
- Source: Traktorenlexikon, “Case 770”