9 material differences · fewer than 12
Tractor oneDEUTZ-ALLIS 61501985–1989No measured PTO figureTractor twoDeutz-Fahr D 6007 (C)1982–1984No measured PTO figure
Which should you choose?
Read our verdict on the 6150 and the D 6007 (C) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 6150 | D 6007 (C) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 56.2 hp | 56.26 hp | — |
| Engine declared | KHD F3L 913 | KHD F3L 913 | — |
| Displacement declared | 3.06 L | 3.06 L | — |
| Maximum torque declared | — | 145 lb·ft · 196 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5–18.6 mph · 25–30 km/h | differs |
| Clutch declared | — | Independent dry double clutch | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | Open centre | — |
| Pump flow declared | 13.1 gpm · 49.6 L/min | — | — |
| Three-point lift, at the coupling points declared | 4,564 lb · 2,070 kg | 5,291 lb · 2,400 kg | +16% D 6007 (C) |
| Rear PTO speeds declared | 540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 4,934 lb · 2,238 kg | 5,313 lb · 2,410 kg | +8% D 6007 (C) |
| Maximum permissible mass declared | — | 8,818 lb · 4,000 kg | — |
| Wheelbase declared | 77.0 in · 1,956 mm | 78.5 in · 1,995 mm | — |
| Length declared | 130.5 in · 3,315 mm | 140.6 in · 3,570 mm | +8% D 6007 (C) |
| Width declared | 64.7 in · 1,643 mm | 74.0 in · 1,880 mm | +14% D 6007 (C) |
| Ground clearance declared | 16.1 in · 409 mm | 18.9 in · 480 mm | +17% D 6007 (C) |
| Turning radius, braked declared | 10.4 ft · 3.17 m | 12.9 ft · 3.93 m | +24% D 6007 (C) |
| Fuel tank declared | 60.2 qt · 57.0 L | 74.0 qt · 70 L | +23% D 6007 (C) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
DEUTZ-ALLIS 6150 sources
- Source: Traktorenlexikon, “Deutz-Allis 6150”
- Source: Traktorenlexikon, “Fendt Farmer 260 S/SA”
Deutz-Fahr D 6007 (C) sources
- Source: Traktorenlexikon, “Deutz-Fahr D 6007”
- Source: Traktorenlexikon, “Fendt Farmer 260 S/SA”