9 material differences · fewer than 12
Tractor oneDeutz-Fahr D 6007 (C)1982–1984No measured PTO figureTractor twoFendt Farmer 304 LS1982–1989No measured PTO figure
Which should you choose?
Read our verdict on the D 6007 (C) and the Farmer 304 LS → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | D 6007 (C) | Farmer 304 LS | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 56.26 hp | 57.1 hp | — |
| Engine declared | KHD F3L 913 | MWM D 226.3.2 | differs |
| Displacement declared | 3.06 L | 3.12 L | — |
| Maximum torque declared | 145 lb·ft · 196 N·m | 150 lb·ft · 204 N·m | — |
| Transmission | |||
| Top speed declared | 15.5–18.6 mph · 25–30 km/h | 24.9 mph · 40 km/h | differs |
| Clutch declared | Independent dry double clutch | — | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | Open centre | — |
| Pump flow declared | — | 10.8 gpm · 40.7 L/min | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/750/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,313 lb · 2,410 kg | 6,856 lb · 3,110 kg | +29% Farmer 304 LS |
| Maximum permissible mass declared | 8,818 lb · 4,000 kg | 10,362 lb · 4,700 kg | +18% Farmer 304 LS |
| Wheelbase declared | 78.5 in · 1,995 mm | 90.0 in · 2,285 mm | +15% Farmer 304 LS |
| Length declared | 140.6 in · 3,570 mm | 148.8 in · 3,780 mm | +6% Farmer 304 LS |
| Width declared | 74.0 in · 1,880 mm | 74.2 in · 1,885 mm | — |
| Ground clearance declared | 18.9 in · 480 mm | 17.5 in · 445 mm | +8% D 6007 (C) |
| Turning radius, braked declared | 12.9 ft · 3.93 m | 13.0 ft · 3.97 m | — |
| Fuel tank declared | 74.0 qt · 70 L | 84.5 qt · 80 L | +14% Farmer 304 LS |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz-Fahr D 6007 (C) sources
- Source: Traktorenlexikon, “Deutz-Fahr D 6007”
- Source: Traktorenlexikon, “Fendt Farmer 260 S/SA”
Fendt Farmer 304 LS sources
- Source: Traktorenlexikon, “Fendt Farmer 304 LS”
- Source: Traktorenlexikon, “Fendt Farmer 102 LS/LSA”