• Rigid chassis
  • WhichTractor size: Standard-size
  • No lab test on file
  • 1969–1973
  • 1,690 built

It sits on the utility/standard-size boundary, so either size is a fair description. It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

J.I. Case 770 specs: hp, weight, years

CASE A 267 four-cylinder. The manufacturer claimed 56.2 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

56.2 hp

41.9 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Case 770”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
9,050 lb
Hyd. flow
16.0 gpm
Top speed
15.5–18.6 mph

J.I. Case 770 specs: key facts

  • The J.I. Case 770 was built from 1969 to 1973.

  • The J.I. Case 770 has a claimed engine power (gross or net not stated) of 41.9 kW (56.2 hp); it has no measured PTO figure.

  • The J.I. Case 770 is two-wheel drive (2WD).

  • The J.I. Case 770 has a CASE A 267 engine, a 4-cylinder unit.

  • The J.I. Case 770 weighs 4,105 kg (9,050 lb) unladen.

  • The J.I. Case 770 has an independent rear PTO running at 540/1000 rpm.

  • The hydraulic pump of the J.I. Case 770 delivers 60.6 L/min (16.0 gpm).

Source · Traktorenlexikon, “Case 770”

How does the 770 compare with its class?

  • Strength:

    A hydraulic pump flow of 60.6 L/min is high for its class — 85% above the median of 32.8 L/min across the 276 machines within 10% of its power that hold this figure.

  • Strength:

    A 189 L fuel tank is high for its class — 170% above the median of 70 L across the 324 machines within 10% of its power that hold this figure.

  • Worth knowing:

    An unladen mass of 4,105 kg is high for its class — 62% above the median of 2,540 kg across the 341 machines within 10% of its power that hold this figure.

Derived by WhichTractor from 341 comparable records. How we work this out

Illustration of the 1969–1973 J.I. Case 770, a 56 hp farm tractor, cab was optional — shown without it, a drawing generated from its specification record
Illustration — not a photograph · cab was optional — shown without it

How much horsepower does a 770 have?

The only figure for the 770 is 56.2 hp (41.9 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
56.2 hp

Source · Traktorenlexikon, “Case 770”

What engine is in a 770?

A 770 has a CASE A 267, a 4-cylinder engine.

Engine — 770 engine specifications
Make & modelCASE A 267
Cylinders4, liquid-cooled
Electrical system12 V

Source · Traktorenlexikon, “Case 770”

How much will a 770 lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the 770 are below.

Hydraulics & PTO — 770 hydraulics and PTO specifications
Pump flow16.0 gpm · 60.6 L/min
Hitch categoryCategory 2
Rear PTOIndependent, engine-driven, 540/1000 rpm

Source · Traktorenlexikon, “Case 770”

What transmission does a 770 have?

Transmission specifications for the 770 are below.

Transmission — 770 transmission specifications
BrakesPedal-operated hydraulic double disc brake acting on differential side shafts
SteeringHydrostatic steering with separate oil circuit
Top speed15.5–18.6 mph · 25–30 km/hthe article lists alternatives

Source · Traktorenlexikon, “Case 770”

How much does a 770 weigh?

A 770 weighs 9,050 lb (4,105 kg) unladen.

Weights & dimensions — 770 weights and dimensions
Unladen weight9,050 lb · 4,105 kg
Wheelbase101.0 in · 2,565 mm
Length153.0 in · 3,886 mm
Width88.0 in · 2,235 mm
Height67.0 in · 1,702 mm
Ground clearance15.0 in · 381 mm
Front track62.0–90.0 in · 1,575–2,286 mm
Rear track60.0–88.0 in · 1,524–2,235 mm
Turning radius, braked11.4 ft · 3.48 m

Source · Traktorenlexikon, “Case 770”

What oil does a 770 take, and how much?

A 770 engine takes 8.9 qt (8.4 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

770 fluid capacities, grades and service intervals
SystemCapacity
Engine oil8.9 qt · 8.4 LSource: Traktorenlexikon, “Case 770” · single source, not independently verified
Transmission67.9 qt · 64.3 LSource: Traktorenlexikon, “Case 770” · single source, not independently verified
Cooling system28.0 qt · 26.5 LSource: Traktorenlexikon, “Case 770” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

Which tractors compare with a 770?

Within 10% of its 56.2 hp of claimed engine power, the same type, and first built within 15 years of it.

Common questions about the J.I. Case 770

Is a 770 two-wheel drive or four-wheel drive?

The J.I. Case 770 is two-wheel drive (2WD).

What PTO does a 770 have?

A 770 has a independent 540/1000 rpm rear PTO.

What serial numbers does a 770 carry?

The source records 2 changes by serial number, so some parts depend on which serial a 770 carries. It does not say whether that is the tractor’s or the engine’s number, and we never work out a year from a serial number.

Sources and how this page was built

Compiled from Traktorenlexikon, “Case 770”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Case 770 — CC BY-SA 4.0, WIKIBOOKS-TL-115340 · revision 989862. Wikibooks contributors (Traktorenlexikon). Original document