- Rigid chassis
- WhichTractor size: Standard-size
- Not independently tested
- 1993–1995
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Deutz-Fahr AgroStar 6.38 Full specifications
K.H.D. BF6L 913 T six-cylinder diesel. The manufacturer claimed 123 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
123 hp
92 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Deutz-Fahr AgroStar 6.38”, claimed
- Weight
- 10,229 lb
- 3-point lift
- 14,330 lb
- Hyd. flow
- 15.3 gpm
- Top speed
- 18.6–24.9 mph
Deutz-Fahr AgroStar 6.38 specs: key facts
The Deutz-Fahr AgroStar 6.38 was built from 1993 to 1995.
The Deutz-Fahr AgroStar 6.38 has a claimed engine power (gross or net not stated) of 92 kW (123 hp); it has no measured PTO figure.
The Deutz-Fahr AgroStar 6.38 is four-wheel drive (4WD).
The Deutz-Fahr AgroStar 6.38 has a K.H.D. BF6L 913 T engine, a 6-cylinder 6.13 L diesel unit.Source 1
The Deutz-Fahr AgroStar 6.38 weighs 4,640 kg (10,229 lb) unladen.
The Deutz-Fahr AgroStar 6.38 has an independent rear PTO running at 1000 rpm.
The three-point hitch of the Deutz-Fahr AgroStar 6.38 lifts 6,500 kg (14,330 lb) at the lower-link ends.
The hydraulic pump of the Deutz-Fahr AgroStar 6.38 delivers 58.0 L/min (15.3 gpm).
Source · Traktorenlexikon, “Deutz-Fahr AgroStar 6.38”
How much horsepower does an AgroStar 6.38 have?
The only figure for the AgroStar 6.38 is 123 hp (92 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Deutz-Fahr AgroStar 6.38”
What engine is in an AgroStar 6.38?
An AgroStar 6.38 has a K.H.D. BF6L 913 T, a 6-cylinder 6.13 L diesel engine.
| Make & model | K.H.D. BF6L 913 T |
|---|---|
| Cylinders | 6, air-cooledSource 2 |
| Displacement | 374.0 ci · 6.13 L |
| Max torque | 340 lb·ft · 461 N·m @ 1,600 rpmSource 2 |
| Electrical system | 12 VSource 2 |
Source · Traktorenlexikon, “Deutz-Allis 7120”
How much will an AgroStar 6.38 lift, and what is its hydraulic flow?
An AgroStar 6.38 lifts 14,330 lb (6,500 kg) at the lower-link ends of its Category 2 three-point hitch.
| Pump flow | 15.3 gpm · 58.0 L/min |
|---|---|
| Hitch category | Category 2 |
| Lift at ends | 14,330 lb · 6,500 kg |
| Rear PTO | Independent, 1000 rpmEngages under load |
| PTO shaft | 1 3/8"- 6 splines |
Source · Traktorenlexikon, “Deutz-Fahr AgroStar 6.38”
What transmission does an AgroStar 6.38 have?
Transmission specifications for the AgroStar 6.38 are below.
| Top speed | 18.6–24.9 mph · 30–40 km/hthe article lists alternatives |
|---|
Source · Traktorenlexikon, “Deutz-Fahr AgroStar 6.38”
How much does an AgroStar 6.38 weigh?
An AgroStar 6.38 weighs 10,229 lb (4,640 kg) unladen.
| Unladen weight | 10,229 lb · 4,640 kg |
|---|---|
| Maximum permissible mass | 18,739 lb · 8,500 kg |
| Maximum front axle load | 7,716 lb · 3,500 kg |
| Maximum rear axle load | 14,330 lb · 6,500 kg |
| Wheelbase | 107.0 in · 2,718 mm |
| Length | 179.4 in · 4,556 mm |
| Width | 97.2 in · 2,470 mm |
| Height | 110.9 in · 2,818 mm |
| Ground clearance | 20.9 in · 530 mm |
| Front track | 63.0–70.9 in · 1,600–1,800 mmthe article lists alternatives |
| Rear track | 59.1–70.9 in · 1,500–1,800 mmthe article lists alternatives |
Source · Traktorenlexikon, “Deutz-Fahr AgroStar 6.38”
Which tractors compare with an AgroStar 6.38?
Within 10% of its 102 hp at the PTO (claimed), the same type, and first built within 15 years of it.
- Deutz-Fahr AgroPrima 6.16102 hp PTO, claimed · 1992–1995Side by side with the AgroStar 6.38 →
- Deutz-Fahr AgroStar 6.31102 hp PTO, claimed · 1990–1993Side by side with the AgroStar 6.38 →
- Fiat F-120 DT101.8 hp PTO, claimed · 1990–1993Side by side with the AgroStar 6.38 →
- SAME Antares 110101.6 hp PTO, claimed · 1991–1996Side by side with the AgroStar 6.38 →
- Massey Ferguson MF 4370 (A)101.5 hp PTO, claimed · 2001–2003Side by side with the AgroStar 6.38 →
- Case-IH 5240 (DT)101.4 hp PTO, claimed · 1989–1997Side by side with the AgroStar 6.38 →
Everything else people ask
Is an AgroStar 6.38 two-wheel drive or four-wheel drive?
The Deutz-Fahr AgroStar 6.38 is four-wheel drive (4WD).
What PTO does an AgroStar 6.38 have?
An AgroStar 6.38 has a independent 1000 rpm rear PTO on a 1 3/8"- 6 splines shaft.
Where this page comes from
Compiled from Traktorenlexikon, “Deutz-Allis 7120”; and Traktorenlexikon, “Deutz-Fahr AgroStar 6.38”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Deutz-Allis 7120 — CC BY-SA 4.0, WIKIBOOKS-TL-75505 · revision 1083347. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: Deutz-Fahr AgroStar 6.38 — CC BY-SA 4.0, WIKIBOOKS-TL-87898 · revision 1067915. Wikibooks contributors (Traktorenlexikon). Original document