• Rigid chassis
  • WhichTractor size: Standard-size
  • No lab test on file
  • 1993–1995

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Deutz-Fahr AgroStar 4.78 specs: hp, weight, years

KHD BF4L 913 four-cylinder diesel. The manufacturer claimed 98.7 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

98.7 hp

73.6 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Deutz-Fahr AgroStar 4.78”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
9,259 lb
3-point lift
11,464 lb
Top speed
18.6–24.9 mph

Deutz-Fahr AgroStar 4.78 specs: key facts

  • The Deutz-Fahr AgroStar 4.78 was built from 1993 to 1995.

  • The Deutz-Fahr AgroStar 4.78 has a claimed engine power (gross or net not stated) of 73.6 kW (98.7 hp); it has no measured PTO figure.

  • The Deutz-Fahr AgroStar 4.78 is four-wheel drive (4WD).

  • The Deutz-Fahr AgroStar 4.78 has a KHD BF4L 913 engine, a 4-cylinder 4.09 L diesel unit.

  • The Deutz-Fahr AgroStar 4.78 weighs 4,200 kg (9,259 lb) unladen.

  • The Deutz-Fahr AgroStar 4.78 has an independent rear PTO running at 540/1000/750 rpm.

  • The three-point hitch of the Deutz-Fahr AgroStar 4.78 lifts 5,200 kg (11,464 lb) at the lower-link ends.

Source · Traktorenlexikon, “Deutz-Fahr AgroStar 4.78”

How does the AgroStar 4.78 compare with its class?

  • Strength:

    40 forward gears is high for its class — 150% above the median of 16 across the 298 machines within 10% of its power that hold this figure.

Derived by WhichTractor from 309 comparable records. How we work this out

Illustration of the 1993–1995 Deutz-Fahr AgroStar 4.78, a 99 hp farm tractor, a drawing generated from its specification record
Illustration — not a photograph

How much horsepower does an AgroStar 4.78 have?

The only figure for the AgroStar 4.78 is 98.7 hp (73.6 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
98.7 hp

Source · Traktorenlexikon, “Deutz-Fahr AgroStar 4.78”

What engine is in an AgroStar 4.78?

An AgroStar 4.78 has a KHD BF4L 913, a 4-cylinder 4.09 L diesel engine.

Engine — AgroStar 4.78 engine specifications
Make & modelKHD BF4L 913
Cylinders4, air-cooled
Displacement249.3 ci · 4.09 L
Max torque285 lb·ft · 387 N·m @ 1,600 rpm
InjectionDirect injection with Bosch multi-hole nozzle
Electrical system12 V

Source · Traktorenlexikon, “Deutz-Fahr AgroStar 4.78”

How much will an AgroStar 4.78 lift?

An AgroStar 4.78 lifts 11,464 lb (5,200 kg) at the lower-link ends of its Category 2 three-point hitch.

Hydraulics & PTO — AgroStar 4.78 hydraulics and PTO specifications
Hitch categoryCategory 2
Lift at ends11,464 lb · 5,200 kg
Rear PTOIndependent, 540/1000/750 rpm @ 2,121 engine rpmEngages under load
PTO shaft1 3/8"- 6 splines (Form-1)

Source · Traktorenlexikon, “Deutz-Fahr AgroStar 4.78”

What transmission does an AgroStar 4.78 have?

Transmission specifications for the AgroStar 4.78 are below.

Transmission — AgroStar 4.78 transmission specifications
BrakesHydraulically operated dry fixed caliper disc brake outside the transmission housing
SteeringHydrostatic ZF steering, telescopic and tiltable
Top speed18.6–24.9 mph · 30–40 km/hthe article lists alternatives

Source · Traktorenlexikon, “Deutz-Fahr AgroStar 4.78”

How much does an AgroStar 4.78 weigh?

An AgroStar 4.78 weighs 9,259 lb (4,200 kg) unladen.

Weights & dimensions — AgroStar 4.78 weights and dimensions
Unladen weight9,259 lb · 4,200 kg
Maximum permissible mass16,535 lb · 7,500 kg
Maximum front axle load6,614 lb · 3,000 kg
Maximum rear axle load14,330 lb · 6,500 kg
Wheelbase96.5 in · 2,450 mm
Length168.2 in · 4,272 mm
Width90.2 in · 2,290 mm
Height110.0 in · 2,793 mm
Ground clearance18.3 in · 465 mm
Front track63.0–70.9 in · 1,600–1,800 mmthe article lists alternatives
Rear track59.1–70.9 in · 1,500–1,800 mmthe article lists alternatives

Source · Traktorenlexikon, “Deutz-Fahr AgroStar 4.78”

What oil does an AgroStar 4.78 take, and how much?

An AgroStar 4.78 engine takes 11.6 qt (11 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

AgroStar 4.78 fluid capacities, grades and service intervals
SystemCapacity
Engine oil11.6 qt · 11 LSource: Traktorenlexikon, “Deutz-Fahr AgroStar 4.78” · single source, not independently verified
Transmission46.5 qt · 44 LSource: Traktorenlexikon, “Deutz-Fahr AgroStar 4.78” · single source, not independently verified
Hydraulic31.7 qt · 30 LSource: Traktorenlexikon, “Deutz-Fahr AgroStar 4.78” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

Which tractors compare with an AgroStar 4.78?

Within 10% of its 98.7 hp of claimed engine power, the same type, and first built within 15 years of it.

Common questions about the Deutz-Fahr AgroStar 4.78

Is an AgroStar 4.78 two-wheel drive or four-wheel drive?

The Deutz-Fahr AgroStar 4.78 is four-wheel drive (4WD).

What PTO does an AgroStar 4.78 have?

An AgroStar 4.78 has a independent 540/1000/750 rpm rear PTO on a 1 3/8"- 6 splines (Form-1) shaft.

Sources and how this page was built

Compiled from Traktorenlexikon, “Deutz-Fahr AgroStar 4.78”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Deutz-Fahr AgroStar 4.78 — CC BY-SA 4.0, WIKIBOOKS-TL-79387 · revision 1007751. Wikibooks contributors (Traktorenlexikon). Original document