- Rigid chassis
- WhichTractor size: Standard-size
- Not independently tested
- 1996–1999
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Fiat M 100 Full specifications
NEW HOLLAND 675-TC six-cylinder diesel. The manufacturer claimed 98.7 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
98.7 hp
73.6 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Fiatagri M100”, claimed
- Weight
- 11,087 lb
- 3-point lift
- 10,803 lb
- Hyd. flow
- 26.3 gpm
- Top speed
- 18.6–24.9 mph
Fiat M 100 specs: key facts
The Fiat M 100 was built from 1996 to 1999.
The Fiat M 100 has a claimed engine power (gross or net not stated) of 73.6 kW (98.7 hp); it has no measured PTO figure.
The Fiat M 100 is four-wheel drive (4WD).
The Fiat M 100 has a NEW HOLLAND 675-TC engine, a 6-cylinder 7.48 L diesel unit.Source 2
The Fiat M 100 weighs 5,029 kg (11,087 lb) unladen.
The Fiat M 100 has an independent rear PTO running at 540/1000 rpm.
The three-point hitch of the Fiat M 100 lifts 4,900 kg (10,803 lb) at the lower-link ends.
The hydraulic pump of the Fiat M 100 delivers 99.6 L/min (26.3 gpm).
Source · Traktorenlexikon, “Fiatagri M100”
How much horsepower does an M 100 have?
The only figure for the M 100 is 98.7 hp (73.6 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Fiatagri M100”
What engine is in an M 100?
An M 100 has an NEW HOLLAND 675-TC, a 6-cylinder 7.48 L diesel engine.
| Make & model | NEW HOLLAND 675-TCSource 2 |
|---|---|
| Cylinders | 6, liquid-cooledSource 2 |
| Displacement | 456.3 ci · 7.48 LSource 2 |
| Max torque | 297 lb·ft · 403 N·m @ 1,413 rpm |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Fiatagri M100”
How much will an M 100 lift, and what is its hydraulic flow?
An M 100 lifts 10,803 lb (4,900 kg) at the lower-link ends.
| Pump flow | 26.3 gpm · 99.6 L/min |
|---|---|
| Pressure | 2,408–2,582 psi · 166–178 bar |
| Lift at ends | 10,803 lb · 4,900 kg |
| Rear PTO | Independent, engine-driven, 540/1000 rpm @ 1,971 engine rpmEngages under loadGround-speed PTO available |
| PTO shaft | 1 3/8"- 6 splines or 1 3/8"- 21 splines |
Source · Traktorenlexikon, “Fiatagri M100”
What transmission does an M 100 have?
Transmission specifications for the M 100 are below.
| Clutch | Electro-hydraulically operated oil-immersed New Holland multi-plate driving clutch |
|---|---|
| Steering | Hydrostatic Danfoss steering with shared oil supply |
| Top speed | 18.6–24.9 mph · 30–40 km/hthe article lists alternatives |
Source · Traktorenlexikon, “Fiatagri M100”
How much does an M 100 weigh?
An M 100 weighs 11,087 lb (5,029 kg) unladen.
| Unladen weight | 11,087 lb · 5,029 kg |
|---|---|
| Maximum permissible mass | 16,535 lb · 7,500 kg |
| Wheelbase | 107.2 in · 2,723 mm |
| Length | 183.4 in · 4,658 mm |
| Width | 84.1 in · 2,135 mm |
| Height | 111.2 in · 2,824 mm |
| Ground clearance | 14.2 in · 360 mm |
| Front track | 61.1–89.3 in · 1,551–2,269 mm |
| Rear track | 64.2–87.9 in · 1,630–2,232 mm |
Source · Traktorenlexikon, “Fiatagri M100”
Which tractors compare with an M 100?
Within 10% of its 98.7 hp of claimed engine power, the same type, and first built within 15 years of it.
- Deutz-Fahr Agrotron 6.01 S98.7 hp engine, claimed · 1996–1997Side by side with the M 100 →
- Deutz-Fahr Agrotron 10698.7 hp engine, claimed · 1997–2000Side by side with the M 100 →
- Deutz-Fahr Agrosun 10098.7 hp engine, claimed · 1998–2004Side by side with the M 100 →
- Deutz-Fahr AgroStar 4.7898.7 hp engine, claimed · 1993–1995Side by side with the M 100 →
- Deutz-Fahr AgroXtra 6.0798.7 hp engine, claimed · 1991–1995Side by side with the M 100 →
- Renault 106-54 TL98.7 hp engine, claimed · 1991–2000Side by side with the M 100 →
Everything else people ask
Is an M 100 two-wheel drive or four-wheel drive?
The Fiat M 100 is four-wheel drive (4WD).
What PTO does an M 100 have?
An M 100 has a independent 540/1000 rpm rear PTO on a 1 3/8"- 6 splines or 1 3/8"- 21 splines shaft.
Where this page comes from
Compiled from Traktorenlexikon, “Fiatagri M100”; and Traktorenlexikon, “New Holland 8160”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Fiatagri M100 — CC BY-SA 4.0, WIKIBOOKS-TL-108915 · revision 990913. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: New Holland 8160 — CC BY-SA 4.0, WIKIBOOKS-TL-91561 · revision 993154. Wikibooks contributors (Traktorenlexikon). Original document