AGCO-ALLIS 8775 vs Deutz-Fahr Agroplus V 420

9 material differences · fewer than 12

Tractor one

AGCO-ALLIS 8775

1998–1999

No measured PTO figure

Tractor two

Deutz-Fahr Agroplus V 420

from 2009

No measured PTO figure

Which should you choose?

We will not advise between these two machines, because their unladen weight differs by more than 25% (61%); the drive differs (Two-wheel or four-wheel drive; 4WD); they were not built in overlapping years (1998–1999; 2009–2009). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

9 material differences · 2 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 8775 and Deutz-Fahr Agroplus V 420, field by field
Field	8775	Agroplus V 420	Gap
Engine
Engine power, claimed claimed	94.7 hp	94.7 hp	—
Engine declared	SISU-DIESEL 666	Same 1000.4 WT	differs
Displacement declared	—	4.00 L	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9 mph · 40 km/h	differs
Clutch declared	Oil-cooled wet multi-disc clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	Open centre	—
Pump flow declared	29.8 gpm · 112.8 L/min	14.3 gpm · 54.0 L/min	+109% 8775
Three-point lift at ends declared	7,361 lb · 3,339 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540 rpm / 1000 rpm	differs
Weight & dimensions
Unladen weight declared	9,359 lb · 4,245 kg	5,798 lb · 2,630 kg	+61% 8775
Wheelbase declared	112.6 in · 2,860 mm	80.9 in · 2,056 mm	+39% 8775
Length declared	176.0 in · 4,470 mm	145.9 in · 3,706 mm	+21% 8775
Width declared	78.0 in · 1,981 mm	—	—
Height declared	109.0 in · 2,769 mm	86.6 in · 2,200 mm	+26% 8775
Ground clearance declared	—	11.0 in · 280 mm	—
Fuel tank declared	169.1 qt · 160.0 L	58.1 qt · 55 L	+191% 8775

AGCO-ALLIS 8775 sources

Source

Source: Traktorenlexikon, “AGCO-Allis 8775”

Deutz-Fahr Agroplus V 420 sources

Source

Source: Traktorenlexikon, “Deutz-Fahr Agroplus V 420”
Source: Traktorenlexikon, “Deutz-Fahr Agroplus S 410”