6 material differences · fewer than 12

Tractor oneDEUTZ-ALLIS 62751986–1990No measured PTO figureTractor twoDeutz-Fahr DX 4.301983–1989No measured PTO figure

Which should you choose?

Read our verdict on the 6275 and the DX 4.30 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

6 material differences · 8 fields identical or within 5%, which is not counted as material

DEUTZ-ALLIS 6275 and Deutz-Fahr DX 4.30, field by field
Field	6275	DX 4.30	Gap
Engine
Engine power, claimed claimed	73.0 hp	73.6 hp	—
Engine declared	KHD F4L 913	KHD F4L 913	—
Displacement declared	4.09 L	4.09 L	—
Maximum torque declared	187 lb·ft · 254 N·m	196 lb·ft · 266 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Independent dry double clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	11.4 gpm · 43.1 L/min	—	—
Pressure declared	3,481 psi · 240 bar	—	—
Three-point lift, at the coupling points declared	7,273 lb · 3,299 kg	8,378 lb · 3,800 kg	+15% DX 4.30
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	7,826 lb · 3,550 kg	8,642 lb · 3,920 kg	+10% DX 4.30
Wheelbase declared	91.6 in · 2,327 mm	94.5 in · 2,400 mm	—
Length declared	155.5 in · 3,950 mm	163.0 in · 4,140 mm	—
Width declared	82.3 in · 2,090 mm	90.6 in · 2,300 mm	+10% DX 4.30
Height, over the cab declared	101.3 in · 2,573 mm	103.0 in · 2,615 mm	—
Ground clearance declared	18.0 in · 457 mm	16.7 in · 425 mm	+8% 6275
Turning radius, braked declared	—	13.7 ft · 4.17 m	—
Fuel tank declared	91.9 qt · 87.0 L	132.1 qt · 125 L	+44% DX 4.30

Source

Source