- Rigid chassis
- WhichTractor size: Utility
- No lab test on file
- 1993–1996
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
John Deere 2400 (A) specs: hp, weight, years
ZETOR 7301 four-cylinder diesel. The manufacturer claimed 73.1 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
73.1 hp
54.5 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “John Deere 2400”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
- Weight
- 7,055 lb
- 3-point lift
- 8,863 lb
- Hyd. flow
- 10.6 gpm
- Top speed
- 18.6 mph
John Deere 2400 (A) specs: key facts
The John Deere 2400 (A) was built from 1993 to 1996.
The John Deere 2400 (A) has a claimed engine power (gross or net not stated) of 54.5 kW (73.1 hp); it has no measured PTO figure.
The John Deere 2400 (A) was offered in two-wheel-drive and four-wheel-drive versions.
The John Deere 2400 (A) has a ZETOR 7301 engine, a 4-cylinder 3.92 L diesel unit.
The John Deere 2400 (A) weighs 3,200 kg (7,055 lb) unladen.
The John Deere 2400 (A) has a rear PTO running at 540/1000 rpm.
The three-point hitch of the John Deere 2400 (A) lifts 4,020 kg (8,863 lb) at the lower-link ends.
The hydraulic pump of the John Deere 2400 (A) delivers 40.0 L/min (10.6 gpm).
Source · Traktorenlexikon, “John Deere 2400”
How much horsepower does a 2400 (A) have?
The only figure for the 2400 (A) is 73.1 hp (54.5 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “John Deere 2400”
What engine is in a 2400 (A)?
A 2400 (A) has a ZETOR 7301, a 4-cylinder 3.92 L diesel engine.
| Make & model | ZETOR 7301 |
|---|---|
| Cylinders | 4, liquid-cooled |
| Displacement | 239.3 ci · 3.92 L |
| Max torque | 207 lb·ft · 281 N·m @ 1,599 rpm |
| Electrical system | 12 V |
Source · Traktorenlexikon, “John Deere 2400”
How much will a 2400 (A) lift, and what is its hydraulic flow?
A 2400 (A) lifts 8,863 lb (4,020 kg) at the lower-link ends of its Category 2 three-point hitch.
| Pump flow | 10.6 gpm · 40.0 L/min |
|---|---|
| Pressure | 1,160 psi · 80 bar |
| Hitch category | Category 2 |
| Lift at ends | 8,863 lb · 4,020 kg |
| Rear PTO | 540/1000 rpm @ 1,994 engine rpm |
| PTO shaft | 1 3/8"- 6 splines or 1 3/8"-21 parts |
Source · Traktorenlexikon, “John Deere 2400”
What transmission does a 2400 (A) have?
Transmission specifications for the 2400 (A) are below.
| Clutch | Dry Zetor double clutch |
|---|---|
| Steering | Hydrostatic Danfoss steering |
| Top speed | 18.6 mph · 30 km/h |
Source · Traktorenlexikon, “John Deere 2400”
How much does a 2400 (A) weigh?
A 2400 (A) weighs 7,055 lb (3,200 kg) unladen.
| Unladen weight | 7,055 lb · 3,200 kg3,580 |
|---|---|
| Maximum permissible mass | 12,346 lb · 5,600 kg |
| Wheelbase | 88.8 in · 2,256 mmtwo-wheel-drive version |
| Length | 147.8 in · 3,755 mm |
| Width | 73.8–88.6 in · 1,875–2,250 mm |
| Height | 104.9 in · 2,665 mmtwo-wheel-drive version |
| Ground clearance | 15.1 in · 383 mm |
| Front track | 55.9–70.7 in · 1,420–1,795 mmtwo-wheel-drive version |
| Rear track | 55.9–70.7 in · 1,420–1,795 mm |
Source · Traktorenlexikon, “John Deere 2400”
What oil does a 2400 (A) take, and how much?
A 2400 (A) engine takes 12.7 qt (12.0 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.
| System | Capacity |
|---|---|
| Engine oil | 12.7 qt · 12.0 LSource: Traktorenlexikon, “John Deere 2400” · single source, not independently verified |
| Transmission & hydraulic | 26.4 qt · 25.0 LSource: Traktorenlexikon, “John Deere 2400” · single source, not independently verified |
| Front axle | 4.2 qt · 4.0 LSource: Traktorenlexikon, “John Deere 2400” · single source, not independently verified |
| Cooling system | 12.3 qt · 11.6 LSource: Traktorenlexikon, “John Deere 2400” · single source, not independently verified |
Always confirm against the operator’s manual for your machine before service.
Which tractors compare with a 2400 (A)?
Within 10% of its 73.1 hp of claimed engine power, the same type, and first built within 15 years of it.
- John Deere 5403 (A)73.1 hp engine, claimed · 2007–2008Side by side with the 2400 (A) →
- DEUTZ-ALLIS 627573.0 hp engine, claimed · 1986–1990Side by side with the 2400 (A) →
- Hürlimann H-76 XA73.0 hp engine, claimed · 2005–2009Side by side with the 2400 (A) →
- Deutz-Fahr DX 4.3073.6 hp engine, claimed · 1983–1989Side by side with the 2400 (A) →
- Fendt Farmer 30774 hp engine, claimed · 1993–1998Side by side with the 2400 (A) →
- Massey Ferguson 3055 (A)74 hp engine, claimed · 1993–1995Side by side with the 2400 (A) →
Common questions about the John Deere 2400 (A)
Is a 2400 (A) two-wheel drive or four-wheel drive?
The John Deere 2400 (A) was offered in two-wheel-drive and four-wheel-drive versions.
What PTO does a 2400 (A) have?
A 2400 (A) has a 540/1000 rpm rear PTO on a 1 3/8"- 6 splines or 1 3/8"-21 parts shaft.
Sources and how this page was built
Compiled from Traktorenlexikon, “John Deere 2400”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: John Deere 2400 — CC BY-SA 4.0, WIKIBOOKS-TL-106269 · revision 874733. Wikibooks contributors (Traktorenlexikon). Original document