WhichTractor
  • Articulated
  • WhichTractor size: High-power
  • Not independently tested
  • 1995–2000

WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Case-IH 9380 Full specifications

CUMMINS N-14 400 A six-cylinder diesel. The manufacturer claimed 394.5 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

394.5 hp

294.2 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Case-IH 9380”, claimed

Weight
31,581 lb
Hyd. flow
27.5 gpm
Top speed
18.6 mph

Case-IH 9380 specs: key facts

  • The Case-IH 9380 was built from 1995 to 2000.

  • The Case-IH 9380 has a claimed engine power (gross or net not stated) of 294.2 kW (394.5 hp); it has no measured PTO figure.

  • The Case-IH 9380 is four-wheel drive (4WD).

  • The Case-IH 9380 has a CUMMINS N-14 400 A engine, a 6-cylinder 14.02 L diesel unit.

  • The Case-IH 9380 weighs 14,325 kg (31,581 lb) unladen.

  • The Case-IH 9380 has a rear PTO running at 1000 rpm.

  • The hydraulic pump of the Case-IH 9380 delivers 104.1 L/min (27.5 gpm).

Source · Traktorenlexikon, “Case-IH 9380”

How much horsepower does a 9380 have?

The only figure for the 9380 is 394.5 hp (294.2 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
394.5 hp

Source · Traktorenlexikon, “Case-IH 9380”

What engine is in a 9380?

A 9380 has a CUMMINS N-14 400 A, a 6-cylinder 14.02 L diesel engine.

Engine — 9380 engine specifications
Make & modelCUMMINS N-14 400 A
Cylinders6, liquid-cooled
Displacement855.3 ci · 14.02 L
Max torque1,352 lb·ft · 1,833 N·m @ 1,300 rpm
InjectionDirect injection
Electrical system12 V

Source · Traktorenlexikon, “Case-IH 9380”

How much will a 9380 lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the 9380 are below.

Hydraulics & PTO — 9380 hydraulics and PTO specifications
Pump flow27.5 gpm · 104.1 L/min
Pressure2,306 psi · 159 bar
Hitch categoryCategory 3
Rear PTO1000 rpm
PTO shaft1 3/4"- 20 splined

Source · Traktorenlexikon, “Case-IH 9380”

What transmission does a 9380 have?

Transmission specifications for the 9380 are below.

Transmission — 9380 transmission specifications
ClutchOil-immersed U.V.C. multi-disc clutch
SteeringHydrostatic Eaton steering
Top speed18.6 mph · 30 km/h

Source · Traktorenlexikon, “Case-IH 9380”

How much does a 9380 weigh?

A 9380 weighs 31,581 lb (14,325 kg) unladen.

Weights & dimensions — 9380 weights and dimensions
Unladen weight31,581 lb · 14,325 kg
Wheelbase144.0 in · 3,658 mm
Length283.5 in · 7,202 mm
Width157.9 in · 4,011 mm
Height142.8 in · 3,627 mm
Ground clearance14.4 in · 365 mm
Front track76.5–133.5 in · 1,943–3,391 mmWikibooks gives one track for both axles
Rear track76.5–133.5 in · 1,943–3,391 mmWikibooks gives one track for both axles

Source · Traktorenlexikon, “Case-IH 9380”

Which tractors compare with a 9380?

Within 10% of its 360.7 hp at the PTO (claimed), the same type, and first built within 15 years of it.

Everything else people ask

Is a 9380 two-wheel drive or four-wheel drive?

The Case-IH 9380 is four-wheel drive (4WD).

What PTO does a 9380 have?

A 9380 has a 1000 rpm rear PTO on a 1 3/4"- 20 splined shaft.

Where this page comes from

Compiled from Traktorenlexikon, “Case-IH 9380”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Case-IH 9380 — CC BY-SA 4.0, WIKIBOOKS-TL-115605 · revision 1001612. Wikibooks contributors (Traktorenlexikon). Original document