Case-IH 9280 vs Case-IH 9380

11 material differences · fewer than 12

Tractor one

1990–1995

No measured PTO figure

Tractor two

1995–2000

No measured PTO figure

Which should you choose?

Read our verdict on the 9280 and the 9380 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 5 fields identical or within 5%, which is not counted as material

Case-IH 9280 and Case-IH 9380, field by field
Field	9280	9380	Gap
Engine
Engine power, claimed claimed	374.8 hp	394.5 hp	—
Engine declared	CUMMINS NTA-855 A	CUMMINS N-14 400 A	differs
Displacement declared	10.02 L	14.02 L	+40% 9380
Maximum torque declared	1,265 lb·ft · 1,715 N·m	1,352 lb·ft · 1,833 N·m	+7% 9380
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Oil-immersed multi-plate driving clutch with disc diameter 228.6 mm	Oil-immersed U.V.C. multi-disc clutch	differs
Hydraulics & hitch
Pump flow declared	30.3 gpm · 114.7 L/min	27.5 gpm · 104.1 L/min	+10% 9280
Pressure declared	2,306 psi · 159 bar	2,306 psi · 159 bar	—
Three-point lift at ends declared	24,011 lb · 10,891 kg	—	—
Rear PTO speeds declared	1000 rpm	1000 rpm	—
Weight & dimensions
Unladen weight declared	34,674 lb · 15,728 kg	31,581 lb · 14,325 kg	+10% 9280
Wheelbase declared	76.5–132.6 in · 1,943–3,368 mm	144.0 in · 3,658 mm	differs
Length declared	299.6 in · 7,610 mm	283.5 in · 7,202 mm	+6% 9280
Width declared	153.1 in · 3,890 mm	157.9 in · 4,011 mm	—
Height declared	152.4 in · 3,870 mm	142.8 in · 3,627 mm	+7% 9280
Ground clearance declared	16.7 in · 424 mm	14.4 in · 365 mm	+16% 9280
Fuel tank declared	1,001.7 qt · 948.0 L	1,079.9 qt · 1,022.0 L	+8% 9380

Source

Source