- Articulated
- WhichTractor size: High-power
- Not independently tested
- 1995–2000
WhichTractor size, not the maker’s category
Case-IH 9380 Hydraulics & PTO specifications
11 hydraulics and PTO values on record for the 9380.
Engine power, claimed · gross or net not stated
394.5 hp
294.2 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Case-IH 9380”, claimed
What hydraulics does a 9380 have?
Hydraulic and hitch specifications for the 9380 are below.
| Pump flow | 27.5 gpm · 104.1 L/min |
|---|---|
| Hydraulic pressure | 2,306 psi · 159 bar |
| Rear remote valves | 4 |
| Three-point hitch category | Category 3 |
| Lift capacity 610 mm behind ends | 17,000 lb · 7,711 kg |
Source · Traktorenlexikon, “Case-IH 9380”
What PTO does a 9380 have?
A 9380 has a 1000 rpm rear PTO.
| Rear PTO drive, optional | Engine-driven |
|---|---|
| Rear PTO independence, optional | Independent |
| PTO engages under load, optional | Yes |
| Rear PTO speeds | 1000 rpm |
| Rear PTO shaft | 1 3/4"- 20 splined |
| PTO power, claimed | 360.7 hp · 269.0 kWClaimed; standard not stated by the source |
Source · Traktorenlexikon, “Case-IH 9380”
Where this page comes from
11 hydraulics and PTO values from Traktorenlexikon, “Case-IH 9380”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Case-IH 9380 — CC BY-SA 4.0, WIKIBOOKS-TL-115605 · revision 1001612. Wikibooks contributors (Traktorenlexikon). Original document