WhichTractor
  • Articulated
  • WhichTractor size: High-power
  • Not independently tested
  • 2007–2010

WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

New Holland T 9030 Full specifications

CUMMINS Cursor-13 six-cylinder diesel. The manufacturer claimed 379.8 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

379.8 hp

283.2 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “New Holland T9030”, claimed

Weight
41,780 lb
Hyd. flow
40.6 gpm
Top speed
18.6 mph

New Holland T 9030 specs: key facts

  • The New Holland T 9030 was built from 2007 to 2010.

  • The New Holland T 9030 has a claimed engine power (gross or net not stated) of 283.2 kW (379.8 hp); it has no measured PTO figure.

  • The New Holland T 9030 is four-wheel drive (4WD).

  • The New Holland T 9030 has a CUMMINS Cursor-13 engine, a 6-cylinder 12.88 L diesel unit.

  • The New Holland T 9030 weighs 18,951 kg (41,780 lb) unladen.

  • The New Holland T 9030 has an independent rear PTO running at 1000 rpm.

  • The hydraulic pump of the New Holland T 9030 delivers 153.7 L/min (40.6 gpm).

Source · Traktorenlexikon, “New Holland T9030”

How much horsepower does a T 9030 have?

The only figure for the T 9030 is 379.8 hp (283.2 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
379.8 hp

Source · Traktorenlexikon, “New Holland T9030”

What engine is in a T 9030?

A T 9030 has a CUMMINS Cursor-13, a 6-cylinder 12.88 L diesel engine.

Engine — T 9030 engine specifications
Make & modelCUMMINS Cursor-13
Cylinders6, liquid-cooled
Displacement786.0 ci · 12.88 L
Max torque1,291 lb·ft · 1,751 N·m @ 1,200 rpm
Electrical system12 V

Source · Traktorenlexikon, “New Holland T9030”

How much will a T 9030 lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the T 9030 are below.

Hydraulics & PTO — T 9030 hydraulics and PTO specifications
Pump flow40.6 gpm · 153.7 L/min
Pressure3,336 psi · 230 bar
Hitch categoryCategory 4
Rear PTOIndependent, engine-driven, 1000 rpmEngages under load
PTO shaft1 3/8"- 20 teilig (Form-3)

Source · Traktorenlexikon, “New Holland T9030”

What transmission does a T 9030 have?

Transmission specifications for the T 9030 are below.

Transmission — T 9030 transmission specifications
Top speed18.6 mph · 30 km/h

Source · Traktorenlexikon, “New Holland T9030”

How much does a T 9030 weigh?

A T 9030 weighs 41,780 lb (18,951 kg) unladen.

Weights & dimensions — T 9030 weights and dimensions
Unladen weight41,780 lb · 18,951 kg
Maximum permissible mass45,600 lb · 20,684 kg
Wheelbase154.0 in · 3,911 mm
Length297.6 in · 7,558 mm
Width120.1 in · 3,050 mm
Height150.3 in · 3,818 mm
Front track65.4–116.1 in · 1,662–2,950 mmWikibooks gives one track for both axles
Rear track65.4–116.1 in · 1,662–2,950 mmWikibooks gives one track for both axles

Source · Traktorenlexikon, “New Holland T9030”

Which tractors compare with a T 9030?

Within 10% of its 347.1 hp at the PTO (claimed), the same type, and first built within 15 years of it.

Everything else people ask

Is a T 9030 two-wheel drive or four-wheel drive?

The New Holland T 9030 is four-wheel drive (4WD).

What PTO does a T 9030 have?

A T 9030 has a independent 1000 rpm rear PTO on a 1 3/8"- 20 teilig (Form-3) shaft.

Where this page comes from

Compiled from Traktorenlexikon, “New Holland T9030”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: New Holland T9030 — CC BY-SA 4.0, WIKIBOOKS-TL-111567 · revision 993250. Wikibooks contributors (Traktorenlexikon). Original document