- Rigid chassis
- WhichTractor size: Standard-size
- No lab test on file
- 1972–1975
- 10,126 built
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
ALLIS-CHALMERS 200 Hydraulics & PTO specs
9 hydraulics and PTO values on record for the 200.
Engine power, claimed · gross or net not stated
93.7 hp
69.9 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Allis-Chalmers 200”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
How much will a 200 lift?
A 200 lifts 4,597 lb (2,085 kg) at the lower-link ends.
| Hydraulic centre | Open centre |
|---|---|
| Pump flow | 17.2 gpm · 65.1 L/min |
| Steering pump flow | 4.0 gpm · 15.2 L/min |
| Three-point hitch category | Category 2 |
| Lift capacity at ball ends | 4,597 lb · 2,085 kg |
| Hitch control | Lifting, lowering, draft and position control |
Source · Traktorenlexikon, “Allis-Chalmers 200”
What PTO does a 200 have?
A 200 has a 540 rpm / 1000 rpm rear PTO.
| Rear PTO drive | Transmission-driven |
|---|---|
| Rear PTO speeds | 540 rpm / 1000 rpm |
| Engine speed at 540 PTO | 1,937 rpm |
Source · Traktorenlexikon, “Allis-Chalmers 200”
Sources and how this page was built
9 hydraulics and PTO values from Traktorenlexikon, “Allis-Chalmers 200”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Allis-Chalmers 200 — CC BY-SA 4.0, WIKIBOOKS-TL-123086 · revision 1090167. Wikibooks contributors (Traktorenlexikon). Original document