- Rigid chassis
- WhichTractor size: Utility
- No lab test on file
- 1989–1991
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
VALMET 755/755-4 specs: hp, weight, years
VALMET TD 44 D-7 four-cylinder diesel. The manufacturer claimed 88.8 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
88.8 hp
66.2 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Valmet 755”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
- Weight
- 8,289 lb
- 3-point lift
- 9,921 lb
- Hyd. flow
- 12.4 gpm
- Top speed
- 18.6 mph
VALMET 755/755-4 specs: key facts
The VALMET 755/755-4 was built from 1989 to 1991.
The VALMET 755/755-4 has a claimed engine power (gross or net not stated) of 66.2 kW (88.8 hp); it has no measured PTO figure.
The VALMET 755/755-4 was offered in two-wheel-drive and four-wheel-drive versions.
The VALMET 755/755-4 has a VALMET TD 44 D-7 engine, a 4-cylinder 4.40 L diesel unit.
The VALMET 755/755-4 weighs 3,760 kg (8,289 lb) unladen.
The VALMET 755/755-4 has an independent rear PTO running at 540 rpm.
The three-point hitch of the VALMET 755/755-4 lifts 4,500 kg (9,921 lb) at the lower-link ends.
The hydraulic pump of the VALMET 755/755-4 delivers 47.1 L/min (12.4 gpm).
Source · Traktorenlexikon, “Valmet 755”

How much horsepower does a 755/755-4 have?
The only figure for the 755/755-4 is 88.8 hp (66.2 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Valmet 755”
What engine is in a 755/755-4?
A 755/755-4 has a VALMET TD 44 D-7, a 4-cylinder 4.40 L diesel engine.
| Make & model | VALMET TD 44 D-7 |
|---|---|
| Cylinders | 4, liquid-cooled |
| Displacement | 268.3 ci · 4.40 L |
| Max torque | 240 lb·ft · 325 N·m @ 1,414 rpm |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Valmet 755”
How much will a 755/755-4 lift, and what is its hydraulic flow?
A 755/755-4 lifts 9,921 lb (4,500 kg) at the lower-link ends of its Category 2 three-point hitch.
| Pump flow | 12.4 gpm · 47.1 L/min |
|---|---|
| Pressure | 3,191 psi · 220 bar |
| Hitch category | Category 2 |
| Lift at ends | 9,921 lb · 4,500 kg |
| Rear PTO | Independent, engine-driven, 540 rpm @ 1,893 engine rpmEngages under load |
Source · Traktorenlexikon, “Valmet 755”
What transmission does a 755/755-4 have?
Transmission specifications for the 755/755-4 are below.
| Clutch | Foot-operated dry single-disc clutch combined with wet turbo clutch |
|---|---|
| Brakes | Foot-operated hydraulic wet Girling disc brakes acting on differential shafts |
| Steering | Hydrostatic Danfoss steering type Orbitrol |
| Top speed | 18.6 mph · 30 km/h |
Source · Traktorenlexikon, “Valmet 755”
How much does a 755/755-4 weigh?
A 755/755-4 weighs 8,289 lb (3,760 kg) unladen.
| Unladen weight | 8,289 lb · 3,760 kgtwo-wheel-drive version |
|---|---|
| Wheelbase | 93.9 in · 2,385 mmtwo-wheel-drive version |
| Length | 177.8 in · 4,515 mm |
| Width | 83.9 in · 2,130 mm |
| Height | 105.1 in · 2,670 mm |
| Ground clearance | 18.7 in · 475 mmtwo-wheel-drive version |
| Front track | 57.7–69.5 in · 1,465–1,765 mmtwo-wheel-drive version |
| Rear track | 63.0–82.7 in · 1,600–2,100 mm |
Source · Traktorenlexikon, “Valmet 755”
What oil does a 755/755-4 take, and how much?
A 755/755-4 engine takes 12.7 qt (12.0 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.
| System | Capacity |
|---|---|
| Engine oil | 12.7 qt · 12.0 LSource: Traktorenlexikon, “Valmet 755” · single source, not independently verified |
| Transmission & hydraulic | 53.9 qt · 51.0 LSource: Traktorenlexikon, “Valmet 755” · single source, not independently verified |
| Front axle | 4.2 qt · 4.0 LSource: Traktorenlexikon, “Valmet 755” · single source, not independently verified |
| Cooling system | 16.4 qt · 15.5 LSource: Traktorenlexikon, “Valmet 755” · single source, not independently verified |
Always confirm against the operator’s manual for your machine before service.
Which tractors compare with a 755/755-4?
Within 10% of its 88.8 hp of claimed engine power, the same type, and first built within 15 years of it.
- Case-IH 5120 Maxxum88.8 hp engine, claimed · 1989–1997Side by side with the 755/755-4 →
- Hürlimann H-488 T "Prestige"88.8 hp engine, claimed · 1989–1998Side by side with the 755/755-4 →
- CASE-INTERNATIONAL 995 (DT)88.8 hp engine, claimed · 1990–1993Side by side with the 755/755-4 →
- Massey Ferguson 390 Turbo88.8 hp engine, claimed · 1988–1998Side by side with the 755/755-4 →
- AGCO-ALLIS 669088.8 hp engine, claimed · 1991–1997Side by side with the 755/755-4 →
- Landini 9800 (DT)88.8 hp engine, claimed · 1987–2000Side by side with the 755/755-4 →
Common questions about the VALMET 755/755-4
Is a 755/755-4 two-wheel drive or four-wheel drive?
The VALMET 755/755-4 was offered in two-wheel-drive and four-wheel-drive versions.
What PTO does a 755/755-4 have?
A 755/755-4 has a independent 540 rpm rear PTO.
Sources and how this page was built
Compiled from Traktorenlexikon, “Valmet 755”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Valmet 755 — CC BY-SA 4.0, WIKIBOOKS-TL-116422 · revision 998404. Wikibooks contributors (Traktorenlexikon). Original document