WhichTractor
  • Rigid chassis
  • WhichTractor size: Utility
  • No lab test on file
  • 1987–2000

WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Landini 9800 (DT) specs: hp, weight, years

PERKINS LJ 4.236 four-cylinder diesel. The manufacturer claimed 88.8 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

88.8 hp

66.2 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Landini 9800 DT”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
8,995 lb
3-point lift
10,296 lb
Hyd. flow
13.5 gpm
Top speed
18.6 mph

Landini 9800 (DT) specs: key facts

  • The Landini 9800 (DT) was built from 1987 to 2000.

  • The Landini 9800 (DT) has a claimed engine power (gross or net not stated) of 66.2 kW (88.8 hp); it has no measured PTO figure.

  • The Landini 9800 (DT) was offered in two-wheel-drive and four-wheel-drive versions.

  • The Landini 9800 (DT) has a PERKINS LJ 4.236 engine, a 4-cylinder 3.86 L diesel unit.

  • The Landini 9800 (DT) weighs 4,080 kg (8,995 lb) unladen.

  • The Landini 9800 (DT) has an independent rear PTO running at 540/1000 rpm.

  • The three-point hitch of the Landini 9800 (DT) lifts 4,670 kg (10,296 lb) at the lower-link ends.

  • The hydraulic pump of the Landini 9800 (DT) delivers 51.1 L/min (13.5 gpm).

Source · Traktorenlexikon, “Landini 9800 DT”

How does the 9800 (DT) compare with its class?

  • Strength:

    32 forward gears is high for its class — 167% above the median of 12 across the 360 machines within 10% of its power that hold this figure.

Derived by WhichTractor from 366 comparable records. How we work this out

Illustration of the 1987–2000 Landini 9800 (DT), a 89 hp farm tractor, four-wheel-drive version, a drawing generated from its specification record
Illustration — not a photograph · four-wheel-drive version

How much horsepower does a 9800 (DT) have?

The only figure for the 9800 (DT) is 88.8 hp (66.2 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
88.8 hp

Source · Traktorenlexikon, “Landini 9800 DT”

What engine is in a 9800 (DT)?

A 9800 (DT) has a PERKINS LJ 4.236, a 4-cylinder 3.86 L diesel engine.

Engine — 9800 (DT) engine specifications
Make & modelPERKINS LJ 4.236
Cylinders4, liquid-cooled
Displacement235.6 ci · 3.86 L
Max torque242 lb·ft · 328 N·m @ 1,300 rpm
InjectionDirect injection
Electrical system12 V

Source · Traktorenlexikon, “Landini 9800 DT”

How much will a 9800 (DT) lift, and what is its hydraulic flow?

A 9800 (DT) lifts 10,296 lb (4,670 kg) at the lower-link ends of its Category 2 three-point hitch.

Hydraulics & PTO — 9800 (DT) hydraulics and PTO specifications
Pump flow13.5 gpm · 51.1 L/min
Pressure2,901 psi · 200 bar
Hitch categoryCategory 2
Lift at ends10,296 lb · 4,670 kg
Rear PTOIndependent, engine-driven, 540/1000 rpm @ 1,980 engine rpmEngages under load
PTO shaft1 3/8"- 6 splines or 1 3/8"- 21 part

Source · Traktorenlexikon, “Landini 9800 DT”

What transmission does a 9800 (DT) have?

Transmission specifications for the 9800 (DT) are below.

Transmission — 9800 (DT) transmission specifications
ClutchPedal-operated dry single-disc clutch
BrakesHydraulically operated wet disc brake acting on differential side shafts
SteeringHydrostatic Danfoss steering type OSPC-ON
Top speed18.6 mph · 30 km/h

Source · Traktorenlexikon, “Landini 9800 DT”

How much does a 9800 (DT) weigh?

A 9800 (DT) weighs 8,995 lb (4,080 kg) unladen.

Weights & dimensions — 9800 (DT) weights and dimensions
Unladen weight8,995 lb · 4,080 kgDT: 4,280
Maximum permissible mass14,991 lb · 6,800 kg
Wheelbase96.9 in · 2,460 mmDT 2,464
Length166.1 in · 4,220 mm
Width81.9 in · 2,080 mm
Height108.7 in · 2,760 mm
Ground clearance16.0 in · 407 mmDT: 440
Front track60.7–84.8 in · 1,543–2,153 mmDT: 1,560-2,060
Rear track57.1–76.8 in · 1,450–1,950 mm

Source · Traktorenlexikon, “Landini 9800 DT”

What oil does a 9800 (DT) take, and how much?

A 9800 (DT) engine takes 9.0 qt (8.5 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

9800 (DT) fluid capacities, grades and service intervals
SystemCapacity
Engine oil9.0 qt · 8.5 LSource: Traktorenlexikon, “Landini 9800 DT” · single source, not independently verified
Hydraulic67.6 qt · 64.0 LSource: Traktorenlexikon, “Landini 9800 DT” · single source, not independently verified
Front axle14.8 qt · 14.0 LSource: Traktorenlexikon, “Landini 9800 DT” · single source, not independently verified
Cooling system20.5 qt · 19.4 LSource: Traktorenlexikon, “Landini 9800 DT” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

Which tractors compare with a 9800 (DT)?

Within 10% of its 88.8 hp of claimed engine power, the same type, and first built within 15 years of it.

Common questions about the Landini 9800 (DT)

Is a 9800 (DT) two-wheel drive or four-wheel drive?

The Landini 9800 (DT) was offered in two-wheel-drive and four-wheel-drive versions.

What PTO does a 9800 (DT) have?

A 9800 (DT) has a independent 540/1000 rpm rear PTO on a 1 3/8"- 6 splines or 1 3/8"- 21 part shaft.

Sources and how this page was built

Compiled from Traktorenlexikon, “Landini 9800 DT”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Landini 9800 DT — CC BY-SA 4.0, WIKIBOOKS-TL-113033 · revision 991554. Wikibooks contributors (Traktorenlexikon). Original document