12 material differences
Tractor oneAGCO-ALLIS 66901991–1997No measured PTO figureTractor twoVALMET 755/755-41989–1991No measured PTO figure
Which should you choose?
Read our verdict on the 6690 and the 755/755-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
12 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 6690 | 755/755-4 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 88.8 hp | 88.8 hp | — |
| Engine declared | S.L.H. 1000.4 AT | VALMET TD 44 D-7 | differs |
| Displacement declared | 4.00 L | 4.40 L | +10% 755/755-4 |
| Maximum torque declared | 224 lb·ft · 304 N·m | 240 lb·ft · 325 N·m | +7% 755/755-4 |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | Pedal-operated dry Same double clutch type 12 inch | Foot-operated dry single-disc clutch combined with wet turbo clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 9.5 gpm · 35.8 L/min | 12.4 gpm · 47.1 L/min | +32% 755/755-4 |
| Pressure declared | 3,046 psi · 210 bar | 3,191 psi · 220 bar | — |
| Three-point lift, at the coupling points declared | 6,790 lb · 3,080 kg | 9,921 lb · 4,500 kg | +46% 755/755-4 |
| Rear PTO speeds declared | 540/1000/540E/1000E rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,856 lb · 3,110 kg | 8,289 lb · 3,760 kg | +21% 755/755-4 |
| Maximum permissible mass declared | 11,464 lb · 5,200 kg | — | — |
| Wheelbase declared | 96.4 in · 2,449 mm | 93.9 in · 2,385 mm | — |
| Length declared | 161.2 in · 4,094 mm | 177.8 in · 4,515 mm | +10% 755/755-4 |
| Width declared | 82.4 in · 2,093 mm | 83.9 in · 2,130 mm | — |
| Ground clearance declared | 17.3 in · 440 mm | 18.7 in · 475 mm | +8% 755/755-4 |
| Turning radius, braked declared | 9.6 ft · 2.94 m | — | — |
| Fuel tank declared | 83.5 qt · 79.0 L | 190.2 qt · 180.0 L | +128% 755/755-4 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
AGCO-ALLIS 6690 sources
Source
- Source: Traktorenlexikon, “AGCO-Allis 6690”
VALMET 755/755-4 sources
Source
- Source: Traktorenlexikon, “Valmet 755”