13 material differences

Tractor oneCASE-INTERNATIONAL 995 (DT)1990–1993No measured PTO figureTractor twoVALMET 755/755-41989–1991No measured PTO figure

Which should you choose?

Read our verdict on the 995 (DT) and the 755/755-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 3 fields identical or within 5%, which is not counted as material

CASE-INTERNATIONAL 995 (DT) and VALMET 755/755-4, field by field
Field	995 (DT)	755/755-4	Gap
Engine
Engine power, claimed claimed	88.8 hp	88.8 hp	—
Engine declared	IHC D-268	VALMET TD 44 D-7	differs
Displacement declared	4.39 L	4.40 L	—
Maximum torque declared	221 lb·ft · 299 N·m	240 lb·ft · 325 N·m	+9% 755/755-4
Transmission
Top speed declared	21.7 mph · 35 km/h	18.6 mph · 30 km/h	+17% 995 (DT)
Clutch declared	Pedal-operated dry Rockford single-disc clutch	Foot-operated dry single-disc clutch combined with wet turbo clutch	differs
Hydraulics & hitch
Pump flow declared	—	12.4 gpm · 47.1 L/min	—
Pressure declared	2,698 psi · 186 bar	3,191 psi · 220 bar	+18% 755/755-4
Three-point lift, at the coupling points declared	5,351 lb · 2,427 kg	9,921 lb · 4,500 kg	+85% 755/755-4
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	6,535 lb · 2,964 kg	8,289 lb · 3,760 kg	+27% 755/755-4
Wheelbase declared	88.0 in · 2,235 mm	93.9 in · 2,385 mm	+7% 755/755-4
Length declared	151.4 in · 3,845 mm	177.8 in · 4,515 mm	+17% 755/755-4
Width declared	73.0–92.7 in · 1,854–2,354 mm	83.9 in · 2,130 mm	differs
Height, over the cab declared	105.1 in · 2,670 mm	105.1 in · 2,670 mm	—
Ground clearance declared	22.0 in · 559 mm	18.7 in · 475 mm	+18% 995 (DT)
Fuel tank declared	118.3 qt · 112.0 L	190.2 qt · 180.0 L	+61% 755/755-4

Source

Source