WhichTractor
  • Rigid chassis
  • WhichTractor size: Utility
  • No lab test on file
  • 1990–1993

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

CASE-INTERNATIONAL 995 (DT) specs: hp, weight, years

IHC D-268 four-cylinder diesel. The manufacturer claimed 88.8 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

88.8 hp

66.2 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Case-IH 995”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
6,535 lb
3-point lift
5,351 lb
Top speed
21.7 mph

CASE-INTERNATIONAL 995 (DT) specs: key facts

  • The CASE-INTERNATIONAL 995 (DT) was built from 1990 to 1993.

  • The CASE-INTERNATIONAL 995 (DT) has a claimed engine power (gross or net not stated) of 66.2 kW (88.8 hp); it has no measured PTO figure.

  • The CASE-INTERNATIONAL 995 (DT) was offered in two-wheel-drive and four-wheel-drive versions.

  • The CASE-INTERNATIONAL 995 (DT) has a IHC D-268 engine, a 4-cylinder 4.39 L diesel unit.Source 1

  • The CASE-INTERNATIONAL 995 (DT) weighs 2,964 kg (6,535 lb) unladen.

  • The CASE-INTERNATIONAL 995 (DT) has an independent rear PTO running at 540/1000 rpm.

  • The three-point hitch of the CASE-INTERNATIONAL 995 (DT) lifts 2,427 kg (5,351 lb) at the lower-link ends.

Source · Traktorenlexikon, “Case-IH 995”

How does the 995 (DT) compare with its class?

  • Limitation:

    A three-point lift at the lower links of 2,427 kg is low for its class — 34% below the median of 3,700 kg across the 267 machines within 10% of its power that hold this figure.

  • Limitation:

    Eight forward gears is low for its class — 33% below the median of 12 across the 360 machines within 10% of its power that hold this figure.

Derived by WhichTractor from 366 comparable records. How we work this out

Illustration of the 1990–1993 CASE-INTERNATIONAL 995 (DT), a 89 hp farm tractor, four-wheel-drive version, a drawing generated from its specification record
Illustration — not a photograph · four-wheel-drive version

How much horsepower does a 995 (DT) have?

The only figure for the 995 (DT) is 88.8 hp (66.2 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
88.8 hp

Source · Traktorenlexikon, “Case-IH 995”

What engine is in a 995 (DT)?

A 995 (DT) has an IHC D-268, a 4-cylinder 4.39 L diesel engine.

Engine — 995 (DT) engine specifications
Make & modelIHC D-268
Cylinders4, liquid-cooledSource 2
Displacement267.8 ci · 4.39 L
Max torque221 lb·ft · 299 N·m @ 1,549 rpmSource 2
Electrical system12 VSource 2

Source · Traktorenlexikon, “Case-IH 4230”

How much will a 995 (DT) lift?

A 995 (DT) lifts 5,351 lb (2,427 kg) at the lower-link ends.

Hydraulics & PTO — 995 (DT) hydraulics and PTO specifications
Pressure2,698 psi · 186 bar
Lift at ends5,351 lb · 2,427 kg
Rear PTOIndependent, engine-driven, 540/1000 rpmEngages under load

Source · Traktorenlexikon, “Case-IH 995”

What transmission does a 995 (DT) have?

Transmission specifications for the 995 (DT) are below.

Transmission — 995 (DT) transmission specifications
ClutchPedal-operated dry Rockford single-disc clutch
BrakesPedal-operated wet disc brake acting on differential side shafts
SteeringHydrostatic Danfoss steering
Top speed21.7 mph · 35 km/h

Source · Traktorenlexikon, “Case-IH 995”

How much does a 995 (DT) weigh?

A 995 (DT) weighs 6,535 lb (2,964 kg) unladen.

Weights & dimensions — 995 (DT) weights and dimensions
Unladen weight6,535 lb · 2,964 kgDT: 3,489
Wheelbase88.0 in · 2,235 mm
Length151.4 in · 3,845 mm
Width73.0–92.7 in · 1,854–2,354 mm
Height105.1 in · 2,670 mm
Ground clearance22.0 in · 559 mmDT: 285
Front track54.0–79.0 in · 1,372–2,007 mmDT: 1,364-1,824
Rear track56.1–75.8 in · 1,425–1,925 mm

Source · Traktorenlexikon, “Case-IH 995”

What oil does a 995 (DT) take, and how much?

A 995 (DT) engine takes 10.4 qt (9.8 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

995 (DT) fluid capacities, grades and service intervals
SystemCapacity
Engine oil10.4 qt · 9.8 LSource: Traktorenlexikon, “Case-IH 995” · single source, not independently verified
Transmission38.6 qt · 36.5 LSource: Traktorenlexikon, “Case-IH 995” · single source, not independently verified
Front axle5.3 qt · 5.0 LSource: Traktorenlexikon, “Case-IH 995” · single source, not independently verified
Cooling system14.5 qt · 13.7 LSource: Traktorenlexikon, “Case-IH 995” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

Which tractors compare with a 995 (DT)?

Within 10% of its 88.8 hp of claimed engine power, the same type, and first built within 15 years of it.

Common questions about the CASE-INTERNATIONAL 995 (DT)

Is a 995 (DT) two-wheel drive or four-wheel drive?

The CASE-INTERNATIONAL 995 (DT) was offered in two-wheel-drive and four-wheel-drive versions.

What PTO does a 995 (DT) have?

A 995 (DT) has a independent 540/1000 rpm rear PTO.

Sources and how this page was built

Compiled from Traktorenlexikon, “Case-IH 995”; and Traktorenlexikon, “Case-IH 4230”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Case-IH 4230 — CC BY-SA 4.0, WIKIBOOKS-TL-27261 · revision 1030780. Wikibooks contributors (Traktorenlexikon). Original document
  2. Traktorenlexikon: Case-IH 995 — CC BY-SA 4.0, WIKIBOOKS-TL-115487 · revision 975072. Wikibooks contributors (Traktorenlexikon). Original document