10 material differences · fewer than 12
Tractor oneDavid Brown 1210 (A)1971–1976No measured PTO figureTractor twoVALMET 702 (A)1972–1980No measured PTO figure
Which should you choose?
Read our verdict on the 1210 (A) and the 702 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 1210 (A) | 702 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 71 hp | 70.0 hp | — |
| Engine declared | DAVID BROWN AD 4/55 A | VALMET 411 B or C | differs |
| Displacement declared | 3.60 L | 4.18 L | +16% 702 (A) |
| Maximum torque declared | 181 lb·ft · 245 N·m | — | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 18.6 mph · 30 km/h | +20% 702 (A) |
| Clutch declared | Dry double clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 7.4 gpm · 28.2 L/min | 6.9 gpm · 26.0 L/min | +8% 1210 (A) |
| Three-point lift, at the coupling points declared | 4,400 lb · 1,996 kg | 4,740 lb · 2,150 kg | +8% 702 (A) |
| Rear PTO speeds declared | 540 rpm | 540 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,798 lb · 2,630 kg | 7,419–7,606 lb · 3,365–3,450 kg | differs |
| Wheelbase declared | 88.5 in · 2,249 mm | 88.2 in · 2,240 mm | — |
| Length declared | 133.3 in · 3,386 mm | 150.4 in · 3,820 mm | +13% 702 (A) |
| Width declared | 69.5 in · 1,765 mm | 73.6 in · 1,869 mm | +6% 702 (A) |
| Ground clearance declared | 21.3 in · 540 mm | 18.1 in · 460 mm | +17% 1210 (A) |
| Turning radius, braked declared | 11.7 ft · 3.58 m | 11.8 ft · 3.61 m | — |
| Fuel tank declared | 86.3 qt · 81.7 L | — | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
David Brown 1210 (A) sources
- Source: Traktorenlexikon, “David Brown 1210”
- Source: Traktorenlexikon, “David Brown 1200”
VALMET 702 (A) sources
- Source: Traktorenlexikon, “Valmet 702”