- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1997–2002
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
VALMET 700 Full specifications
VALMET 320 DS or DSRE three-cylinder diesel. The manufacturer claimed 69.1 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
69.1 hp
51.5 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Valmet 700/II”, claimed
- Weight
- 7,077 lb
- 3-point lift
- 6,294 lb
- Hyd. flow
- 14.7 gpm
- Top speed
- 18.6–24.9 mph
VALMET 700 specs: key facts
The VALMET 700 was built from 1997 to 2002.
The VALMET 700 has a claimed engine power (gross or net not stated) of 51.5 kW (69.1 hp); it has no measured PTO figure.
The VALMET 700 is four-wheel drive (4WD).
The VALMET 700 has a VALMET 320 DS or DSRE engine, a 3-cylinder 3.30 L diesel unit.
The VALMET 700 weighs 3,210 kg (7,077 lb) unladen.
The VALMET 700 has an independent rear PTO running at 540E/540 rpm.
The three-point hitch of the VALMET 700 lifts 2,855 kg (6,294 lb) at the lower-link ends.
The hydraulic pump of the VALMET 700 delivers 55.7 L/min (14.7 gpm).
Source · Traktorenlexikon, “Valmet 700/II”
How much horsepower does a 700 have?
The only figure for the 700 is 69.1 hp (51.5 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Valmet 700/II”
What engine is in a 700?
A 700 has a VALMET 320 DS or DSRE, a 3-cylinder 3.30 L diesel engine.
| Make & model | VALMET 320 DS or DSRE |
|---|---|
| Cylinders | 3, liquid-cooled |
| Displacement | 201.2 ci · 3.30 L |
| Max torque | 214 lb·ft · 290 N·m @ 1,400 rpm |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Valmet 700/II”
How much will a 700 lift, and what is its hydraulic flow?
A 700 lifts 6,294 lb (2,855 kg) at the lower-link ends of its Category 2 three-point hitch.
| Pump flow | 14.7 gpm · 55.7 L/min |
|---|---|
| Pressure | 2,901 psi · 200 bar |
| Hitch category | Category 2 |
| Lift at ends | 6,294 lb · 2,855 kg |
| Rear PTO | Independent, engine-driven, 540E/540 rpm @ 1,890 engine rpmEngages under load |
| PTO shaft | 1 3/8"- 6 splines and 1 3/8"- 21 parts |
Source · Traktorenlexikon, “Valmet 700/II”
What transmission does a 700 have?
Transmission specifications for the 700 are below.
| Clutch | Dry LuK double clutch |
|---|---|
| Brakes | Pedal-operated wet Girling multi-disc brake acting on differential side shafts |
| Steering | Hydrostatic steering |
| Top speed | 18.6–24.9 mph · 30–40 km/hthe article lists alternatives |
Source · Traktorenlexikon, “Valmet 700/II”
How much does a 700 weigh?
A 700 weighs 7,077 lb (3,210 kg) unladen.
| Unladen weight | 7,077 lb · 3,210 kgA: 3,440 |
|---|---|
| Wheelbase | 83.1 in · 2,112 mmA: 2,255 |
| Length | 147.4 in · 3,745 mmA: 3,861 |
| Width | 84.2 in · 2,139 mmA: 2,040 |
| Height | 104.7 in · 2,660 mm |
| Ground clearance | 19.9 in · 505 mmA: 427 |
| Front track | 55.5–63.4 in · 1,410–1,610 mmA: 1,320-1,815 |
| Rear track | 55.5–83.1 in · 1,410–2,110 mm |
| Turning radius, braked | 11.5 ft · 3.50 mA: 4,600 |
Source · Traktorenlexikon, “Valmet 700/II”
Which tractors compare with a 700?
Within 10% of its 59.7 hp at the PTO (claimed), the same type, and first built within 15 years of it.
- Deutz-Fahr DX 3.7059.7 hp PTO, claimed · 1984–1989Side by side with the 700 →
- New Holland TD 70 D (A)59.8 hp PTO, claimed · 2002–2008Side by side with the 700 →
- Case-IH JX 1070 U (A)59.5 hp PTO, claimed · 2004–2008Side by side with the 700 →
- Renault 68-14 RS59.8 hp PTO, claimed · 1984–1987Side by side with the 700 →
- Renault 68-12 RS59.8 hp PTO, claimed · 1983–1987Side by side with the 700 →
- Renault 75-32 MX59.4 hp PTO, claimed · 1989–1993Side by side with the 700 →
Everything else people ask
Is a 700 two-wheel drive or four-wheel drive?
The VALMET 700 is four-wheel drive (4WD).
What PTO does a 700 have?
A 700 has a independent 540E/540 rpm rear PTO on a 1 3/8"- 6 splines and 1 3/8"- 21 parts shaft.
Where this page comes from
Compiled from Traktorenlexikon, “Valmet 700/II”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Valmet 700/II — CC BY-SA 4.0, WIKIBOOKS-TL-116443 · revision 998893. Wikibooks contributors (Traktorenlexikon). Original document