14 material differences

Tractor oneDeutz-Fahr Agroplus 701997–2005No measured PTO figureTractor twoVALMET 7001997–2002No measured PTO figure

Which should you choose?

Read our verdict on the Agroplus 70 and the 700 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

14 material differences · 2 fields identical or within 5%, which is not counted as material

Deutz-Fahr Agroplus 70 and VALMET 700, field by field
Field	Agroplus 70	700	Gap
Engine
Engine power, claimed claimed	69.1 hp	69.1 hp	—
Engine declared	KHD F4L 913 or F4L 914	VALMET 320 DS or DSRE	differs
Displacement declared	—	3.30 L	—
Maximum torque declared	182 lb·ft · 247 N·m	214 lb·ft · 290 N·m	+17% 700
Transmission
Top speed declared	24.9 mph · 40 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Mechanically operated dry Borg & Beck single clutch	Dry LuK double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	11.8 gpm · 44.7 L/min	14.7 gpm · 55.7 L/min	+25% 700
Pressure declared	2,031 psi · 140 bar	2,901 psi · 200 bar	+43% 700
Three-point lift, at the coupling points declared	6,393 lb · 2,900 kg	6,294 lb · 2,855 kg	—
Rear PTO speeds declared	540/1000 rpm	540E/540 rpm	differs
Weight & dimensions
Unladen weight declared	6,063 lb · 2,750 kg	7,077 lb · 3,210 kg	+17% 700
Maximum permissible mass declared	9,921 lb · 4,500 kg	—	—
Wheelbase declared	88.0 in · 2,235 mm	83.1 in · 2,112 mm	+6% Agroplus 70
Length declared	159.8 in · 4,060 mm	147.4 in · 3,745 mm	+8% Agroplus 70
Width declared	79.1 in · 2,008 mm	84.2 in · 2,139 mm	+7% 700
Height, over the cab declared	96.7 in · 2,455 mm	104.7 in · 2,660 mm	+8% 700
Ground clearance declared	17.5 in · 445 mm	19.9 in · 505 mm	+13% 700
Turning radius, braked declared	—	11.5 ft · 3.50 m	—
Fuel tank declared	95.1 qt · 90 L	83.5 qt · 79.0 L	+14% Agroplus 70

Source

Source