12 material differences

Tractor oneAGCO-ALLIS 87451998–1999No measured PTO figureTractor twoVALMET 7001997–2002No measured PTO figure

Which should you choose?

Read our verdict on the 8745 and the 700 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 3 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 8745 and VALMET 700, field by field
Field	8745	700	Gap
Engine
Engine power, claimed claimed	69.1 hp	69.1 hp	—
Engine declared	CUMMINS B 3.9 T	VALMET 320 DS or DSRE	differs
Displacement declared	3.93 L	3.30 L	+19% 8745
Maximum torque declared	—	214 lb·ft · 290 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	oil-cooled wet multi-plate clutch	Dry LuK double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	17.5 gpm · 66.2 L/min	14.7 gpm · 55.7 L/min	+19% 8745
Pressure declared	3,046 psi · 210 bar	2,901 psi · 200 bar	—
Three-point lift, at the coupling points declared	5,732 lb · 2,600 kg	6,294 lb · 2,855 kg	+10% 700
Rear PTO speeds declared	540/1000 rpm	540E/540 rpm	differs
Weight & dimensions
Unladen weight declared	7,970 lb · 3,615 kg	7,077 lb · 3,210 kg	+13% 8745
Wheelbase declared	98.8 in · 2,510 mm	83.1 in · 2,112 mm	+19% 8745
Length declared	161.0 in · 4,089 mm	147.4 in · 3,745 mm	+9% 8745
Width declared	78.0 in · 1,981 mm	84.2 in · 2,139 mm	+8% 700
Height, over the cab declared	103.0 in · 2,616 mm	104.7 in · 2,660 mm	—
Ground clearance declared	—	19.9 in · 505 mm	—
Turning radius, braked declared	—	11.5 ft · 3.50 m	—
Fuel tank declared	147.9 qt · 140.0 L	83.5 qt · 79.0 L	+77% 8745

Source

Source