WhichTractor
  • Rigid chassis
  • WhichTractor size: Compact
  • Not independently tested
  • 1981–1993

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

URSUS C-360 3P Full specifications

PERKINS AD 3.152 UR three-cylinder diesel. The manufacturer claimed 46.8 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

46.8 hp

34.9 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Ursus C-360-3P”, claimed

Weight
4,533 lb
3-point lift
2,646 lb
Hyd. flow
5.7 gpm
Top speed
15.5 mph

URSUS C-360 3P specs: key facts

  • The URSUS C-360 3P was built from 1981 to 1993.

  • The URSUS C-360 3P has a claimed engine power (gross or net not stated) of 34.9 kW (46.8 hp); it has no measured PTO figure.

  • The URSUS C-360 3P is two-wheel drive (2WD).

  • The URSUS C-360 3P has a PERKINS AD 3.152 UR engine, a 3-cylinder 2.50 L diesel unit.

  • The URSUS C-360 3P weighs 2,056 kg (4,533 lb) unladen.

  • The URSUS C-360 3P has a rear PTO running at 540 rpm.

  • The three-point hitch of the URSUS C-360 3P lifts 1,200 kg (2,646 lb) at the lower-link ends.

  • The hydraulic pump of the URSUS C-360 3P delivers 21.5 L/min (5.7 gpm).

Source · Traktorenlexikon, “Ursus C-360-3P”

How much horsepower does a C-360 3P have?

The only figure for the C-360 3P is 46.8 hp (34.9 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
46.8 hp

Source · Traktorenlexikon, “Ursus C-360-3P”

What engine is in a C-360 3P?

A C-360 3P has a PERKINS AD 3.152 UR, a 3-cylinder 2.50 L diesel engine.

Engine — C-360 3P engine specifications
Make & modelPERKINS AD 3.152 UR
Cylinders3, liquid-cooled
Displacement152.7 ci · 2.50 L
Max torque122 lb·ft · 165 N·m @ 1,300 rpm
Electrical system12 V

Source · Traktorenlexikon, “Ursus C-360-3P”

How much will a C-360 3P lift, and what is its hydraulic flow?

A C-360 3P lifts 2,646 lb (1,200 kg) at the lower-link ends of its Category 2 three-point hitch.

Hydraulics & PTO — C-360 3P hydraulics and PTO specifications
Pump flow5.7 gpm · 21.5 L/min
Hitch categoryCategory 2
Lift at ends2,646 lb · 1,200 kg
Rear PTO540 rpm @ 1,944 engine rpm

Source · Traktorenlexikon, “Ursus C-360-3P”

What transmission does a C-360 3P have?

Transmission specifications for the C-360 3P are below.

Transmission — C-360 3P transmission specifications
Top speed15.5 mph · 25 km/h

Source · Traktorenlexikon, “Ursus C-360-3P”

How much does a C-360 3P weigh?

A C-360 3P weighs 4,533 lb (2,056 kg) unladen.

Weights & dimensions — C-360 3P weights and dimensions
Unladen weight4,533 lb · 2,056 kg
Wheelbase85.5 in · 2,172 mm
Length142.1 in · 3,610 mm
Width70.9 in · 1,800 mm
Height80.7 in · 2,050 mm
Ground clearance17.3 in · 440 mm
Front track53.1–68.9 in · 1,350–1,750 mmthe article lists alternatives
Rear track53.1–70.9 in · 1,350–1,800 mm
Turning radius, braked11.1 ft · 3.37 m

Source · Traktorenlexikon, “Ursus C-360-3P”

Which tractors compare with a C-360 3P?

Within 10% of its 46.8 hp of claimed engine power, the same type, and first built within 15 years of it.

Everything else people ask

Is a C-360 3P two-wheel drive or four-wheel drive?

The URSUS C-360 3P is two-wheel drive (2WD).

What PTO does a C-360 3P have?

A C-360 3P has a 540 rpm rear PTO.

Where this page comes from

Compiled from Traktorenlexikon, “Ursus C-360-3P”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Ursus C-360-3P — CC BY-SA 4.0, WIKIBOOKS-TL-120046 · revision 1044792. Wikibooks contributors (Traktorenlexikon). Original document