6 material differences · fewer than 12
Tractor oneHanomag Granit 501 E (S)1967–1970No measured PTO figureTractor twoURSUS C-360 3P1981–1993No measured PTO figure
Which should you choose?
Read our verdict on the Granit 501 E (S) and the C-360 3P → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | Granit 501 E (S) | C-360 3P | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 47 hp | 46.8 hp | — |
| Engine declared | — | PERKINS AD 3.152 UR | — |
| Displacement declared | — | 2.50 L | — |
| Maximum torque declared | 109 lb·ft · 148 N·m | 122 lb·ft · 165 N·m | +11% C-360 3P |
| Transmission | |||
| Top speed declared | 12.4–16.9 mph · 20.0–27.2 km/h | 15.5 mph · 25 km/h | differs |
| Hydraulics & hitch | |||
| Pump flow declared | — | 5.7 gpm · 21.5 L/min | — |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 4,762 lb · 2,160 kg | 4,533 lb · 2,056 kg | — |
| Maximum permissible mass declared | 7,606 lb · 3,450 kg | — | — |
| Wheelbase declared | 82.7 in · 2,100 mm | 85.5 in · 2,172 mm | — |
| Length declared | 134.6 in · 3,420 mm | 142.1 in · 3,610 mm | +6% C-360 3P |
| Width declared | 69.5 in · 1,765 mm | 70.9 in · 1,800 mm | — |
| Ground clearance declared | 15.4 in · 390 mm | 17.3 in · 440 mm | +13% C-360 3P |
| Turning radius, braked declared | 10.5 ft · 3.20 m | 11.1 ft · 3.37 m | +5% C-360 3P |
| Fuel tank declared | — | 71.9 qt · 68.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Hanomag Granit 501 E (S) sources
- Source: Traktorenlexikon, “Hanomag Granit 501 E (S)”
URSUS C-360 3P sources
- Source: Traktorenlexikon, “Ursus C-360-3P”