8 material differences · fewer than 12
Tractor oneMassey Ferguson MF 254 S (Traktorenlexikon)1983–1987No measured PTO figureTractor twoURSUS C-360 3P1981–1993No measured PTO figure
Which should you choose?
We will not advise between these two machines, because their unladen weight differs by more than 25% (27%); the drive differs (Two-wheel or four-wheel drive; 2WD). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
8 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | MF 254 S | C-360 3P | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 47 hp | 46.8 hp | — |
| Engine declared | Perkins A 3.152 | PERKINS AD 3.152 UR | differs |
| Displacement declared | 2.50 L | 2.50 L | — |
| Maximum torque declared | 131 lb·ft · 178 N·m | 122 lb·ft · 165 N·m | +8% MF 254 S |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 15.5 mph · 25 km/h | — |
| Hydraulics & hitch | |||
| Pump flow declared | 9.5 gpm · 36.0 L/min | 5.7 gpm · 21.5 L/min | +67% MF 254 S |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,776 lb · 2,620 kg | 4,533 lb · 2,056 kg | +27% MF 254 S |
| Wheelbase declared | 81.1 in · 2,060 mm | 85.5 in · 2,172 mm | +5% C-360 3P |
| Length declared | 132.3 in · 3,360 mm | 142.1 in · 3,610 mm | +7% C-360 3P |
| Width declared | 74.8 in · 1,900 mm | 70.9 in · 1,800 mm | +6% MF 254 S |
| Ground clearance declared | — | 17.3 in · 440 mm | — |
| Turning radius, braked declared | — | 11.1 ft · 3.37 m | — |
| Fuel tank declared | — | 71.9 qt · 68.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Massey Ferguson MF 254 S (Traktorenlexikon) sources
- Source: Traktorenlexikon, “Massey Ferguson MF 254S”
- Source: Traktorenlexikon, “Massey Ferguson MF 233”
URSUS C-360 3P sources
- Source: Traktorenlexikon, “Ursus C-360-3P”