9 material differences · fewer than 12
Tractor oneLamborghini R-503 (DT)1973–1982No measured PTO figureTractor twoURSUS C-360 3P1981–1993No measured PTO figure
Which should you choose?
Read our verdict on the R-503 (DT) and the C-360 3P → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | R-503 (DT) | C-360 3P | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 46.5 hp | 46.8 hp | — |
| Engine declared | LAMBORGHINI FL-1003/1 | PERKINS AD 3.152 UR | differs |
| Displacement declared | 2.83 L | 2.50 L | +13% R-503 (DT) |
| Maximum torque declared | 118 lb·ft · 160 N·m | 122 lb·ft · 165 N·m | — |
| Transmission | |||
| Top speed declared | 14.3 mph · 23 km/h | 15.5 mph · 25 km/h | +9% C-360 3P |
| Clutch declared | Pedal-operated dry LuK double clutch type 11 inches | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | — | 5.7 gpm · 21.5 L/min | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 3,836 lb · 1,740 kg | 4,533 lb · 2,056 kg | +18% C-360 3P |
| Wheelbase declared | 75.6 in · 1,920 mm | 85.5 in · 2,172 mm | +13% C-360 3P |
| Length declared | 126.4 in · 3,210 mm | 142.1 in · 3,610 mm | +12% C-360 3P |
| Width declared | 63.0–90.6 in · 1,600–2,300 mm | 70.9 in · 1,800 mm | differs |
| Ground clearance declared | 16.1 in · 410 mm | 17.3 in · 440 mm | +7% C-360 3P |
| Turning radius, braked declared | — | 11.1 ft · 3.37 m | — |
| Fuel tank declared | 63.4 qt · 60.0 L | 71.9 qt · 68.0 L | +13% C-360 3P |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Lamborghini R-503 (DT) sources
- Source: Traktorenlexikon, “Lamborghini R 503 DT”
URSUS C-360 3P sources
- Source: Traktorenlexikon, “Ursus C-360-3P”