WhichTractor
  • Rigid chassis
  • WhichTractor size: Standard-size
  • No lab test on file
  • 1978–1990
  • 2,569 built

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Massey Ferguson 1014 (A) specs: hp, weight, years

Perkins A 6.354-4 six-cylinder diesel. The manufacturer claimed 91 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

91 hp

68 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Massey Ferguson MF 1014”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
9,976 lb
Hyd. flow
14.0 gpm
Top speed
18.6 mph

Massey Ferguson 1014 (A) specs: key facts

  • The Massey Ferguson 1014 (A) was built from 1978 to 1990.

  • The Massey Ferguson 1014 (A) has a claimed engine power (gross or net not stated) of 68 kW (91 hp); it has no measured PTO figure.

  • The Massey Ferguson 1014 (A) was offered in two-wheel-drive and four-wheel-drive versions.

  • The Massey Ferguson 1014 (A) has a Perkins A 6.354-4 engine, a 6-cylinder 5.80 L diesel unit.Source 2

  • The Massey Ferguson 1014 (A) weighs 4,525 kg (9,976 lb) unladen.

  • The Massey Ferguson 1014 (A) has a rear PTO running at 540/1000 rpm.

  • The hydraulic pump of the Massey Ferguson 1014 (A) delivers 53.0 L/min (14.0 gpm).

Source · Traktorenlexikon, “Massey Ferguson MF 1014”

Illustration of the 1978–1990 Massey Ferguson MF 1014 (A), a 91 hp farm tractor, four-wheel-drive version, a drawing generated from its specification record
Illustration — not a photograph · four-wheel-drive version

How much horsepower does a 1014 (A) have?

The only figure for the 1014 (A) is 91 hp (68 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
91 hp

Source · Traktorenlexikon, “Massey Ferguson MF 1014”

What engine is in a 1014 (A)?

A 1014 (A) has a Perkins A 6.354-4, a 6-cylinder 5.80 L diesel engine.

Engine — 1014 (A) engine specifications
Make & modelPerkins A 6.354-4Source 2
Cylinders6, liquid-cooledSource 2
Displacement353.9 ci · 5.80 LSource 2
Max torque295 lb·ft · 400 N·m @ 1,400 rpm
InjectionDirect injection method
Electrical system12 V

Source · Traktorenlexikon, “Massey Ferguson MF 1014”

How much will a 1014 (A) lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the 1014 (A) are below.

Hydraulics & PTO — 1014 (A) hydraulics and PTO specifications
Pump flow14.0 gpm · 53.0 L/min
Pressure1,697 psi · 117 bar
Hitch categoryCategory 2
Rear PTO540/1000 rpm @ 2,082 engine rpm
PTO shaft6-Nuten Wellenprofil

Source · Traktorenlexikon, “Massey Ferguson MF 1014”

What transmission does a 1014 (A) have?

Transmission specifications for the 1014 (A) are below.

Transmission — 1014 (A) transmission specifications
ClutchDry and air-cooled double clutch
BrakesMulti-disc brake with hydraulic actuation usable as independent wheel brake
SteeringHydrostatic Danfoss-Orbitrol steering type OSP-B 100
Top speed18.6 mph · 30 km/h

Source · Traktorenlexikon, “Massey Ferguson MF 1014”

How much does a 1014 (A) weigh?

A 1014 (A) weighs 9,976 lb (4,525 kg) unladen.

Weights & dimensions — 1014 (A) weights and dimensions
Unladen weight9,976 lb · 4,525 kgtwo-wheel-drive version
Wheelbase104.7 in · 2,660 mmtwo-wheel-drive version
Length168.9 in · 4,290 mm
Width85.0 in · 2,160 mm
Height111.4 in · 2,830 mm
Ground clearance15.2–19.7 in · 385–500 mm
Front track63.0–78.7 in · 1,600–2,000 mmtwo-wheel-drive version
Rear track63.0–82.7 in · 1,600–2,100 mm

Source · Traktorenlexikon, “Massey Ferguson MF 1014”

What oil does a 1014 (A) take, and how much?

A 1014 (A) engine takes 16.9 qt (16.0 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

1014 (A) fluid capacities, grades and service intervals
SystemCapacity
Engine oil16.9 qt · 16.0 LSource: Traktorenlexikon, “Massey Ferguson MF 1014” · single source, not independently verified
Transmission81.4 qt · 77.0 LSource: Traktorenlexikon, “Massey Ferguson MF 1014” · single source, not independently verified
Front axle11.6 qt · 11 LSource: Traktorenlexikon, “Massey Ferguson MF 1014” · single source, not independently verified
Final drives3.7 qt · 3.5 LSource: Traktorenlexikon, “Massey Ferguson MF 1014” · single source, not independently verified
Cooling system27.5 qt · 26.0 LSource: Traktorenlexikon, “Massey Ferguson MF 1014” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

Which tractors compare with a 1014 (A)?

Within 10% of its 91 hp of claimed engine power, the same type, and first built within 15 years of it.

Common questions about the Massey Ferguson 1014 (A)

Is a 1014 (A) two-wheel drive or four-wheel drive?

The Massey Ferguson 1014 (A) was offered in two-wheel-drive and four-wheel-drive versions.

What PTO does a 1014 (A) have?

A 1014 (A) has a 540/1000 rpm rear PTO on a 6-Nuten Wellenprofil shaft.

Sources and how this page was built

Compiled from Traktorenlexikon, “Massey Ferguson MF 399”; and Traktorenlexikon, “Massey Ferguson MF 1014”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Massey Ferguson MF 1014 — CC BY-SA 4.0, WIKIBOOKS-TL-86999 · revision 1085561. Wikibooks contributors (Traktorenlexikon). Original document
  2. Traktorenlexikon: Massey Ferguson MF 399 — CC BY-SA 4.0, WIKIBOOKS-TL-86702 · revision 1066509. Wikibooks contributors (Traktorenlexikon). Original document