Fiat 940 (DT) vs Massey Ferguson MF 1014 (A)

13 material differences

Tractor one

1978–1979

No measured PTO figure

Tractor two

1978–1990

No measured PTO figure

Which should you choose?

Read our verdict on the 940 (DT) and the MF 1014 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 1 fields identical or within 5%, which is not counted as material

Fiat 940 (DT) and Massey Ferguson MF 1014 (A), field by field
Field	940 (DT)	MF 1014 (A)	Gap
Engine
Engine power, claimed claimed	90.8 hp	91 hp	—
Engine declared	O.M.-FIAT CO 3/80	Perkins A 6.354-4	differs
Displacement declared	4.94 L	5.80 L	+17% MF 1014 (A)
Maximum torque declared	—	295 lb·ft · 400 N·m	—
Transmission
Top speed declared	15.5 mph · 25 km/h	18.6 mph · 30 km/h	+20% MF 1014 (A)
Clutch declared	Dry FEREDO double clutch	Dry and air-cooled double clutch	differs
Hydraulics & hitch
Pump flow declared	10.0 gpm · 38.0 L/min	14.0 gpm · 53.0 L/min	+39% MF 1014 (A)
Pressure declared	2,901 psi · 200 bar	1,697 psi · 117 bar	+71% 940 (DT)
Three-point lift at ends declared	8,378 lb · 3,800 kg	—	—
Rear PTO speeds declared	—	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	8,708 lb · 3,950 kg	9,976 lb · 4,525 kg	+15% MF 1014 (A)
Wheelbase declared	93.3 in · 2,370 mm	104.7 in · 2,660 mm	+12% MF 1014 (A)
Length declared	159.4 in · 4,050 mm	168.9 in · 4,290 mm	+6% MF 1014 (A)
Width declared	76.2 in · 1,935 mm	85.0 in · 2,160 mm	+12% MF 1014 (A)
Height declared	105.1 in · 2,670 mm	111.4 in · 2,830 mm	+6% MF 1014 (A)
Ground clearance declared	22.4 in · 570 mm	15.2–19.7 in · 385–500 mm	differs
Turning radius, braked declared	12.6 ft · 3.84 m	—	—
Fuel tank declared	95.1 qt · 90.0 L	179.6 qt · 170.0 L	+89% MF 1014 (A)

Source

Source