10 material differences · fewer than 12
Tractor oneLamborghini R-955 (DT)1979–1985No measured PTO figureTractor twoMassey Ferguson MF 1014 (A)1978–1990No measured PTO figure
Which should you choose?
Read our verdict on the R-955 (DT) and the MF 1014 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | R-955 (DT) | MF 1014 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 90.8 hp | 91 hp | — |
| Engine declared | SAME 1055-P | Perkins A 6.354-4 | differs |
| Displacement declared | 5.20 L | 5.80 L | +12% MF 1014 (A) |
| Maximum torque declared | 260 lb·ft · 353 N·m | 295 lb·ft · 400 N·m | +13% MF 1014 (A) |
| Transmission | |||
| Top speed declared | 15.5–18.6 mph · 25–30 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | Dry VALEO double clutch | Dry and air-cooled double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | — | 14.0 gpm · 53.0 L/min | — |
| Pressure declared | — | 1,697 psi · 117 bar | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 7,496 lb · 3,400 kg | 9,976 lb · 4,525 kg | +33% MF 1014 (A) |
| Wheelbase declared | 102.4 in · 2,600 mm | 104.7 in · 2,660 mm | — |
| Length declared | 159.6 in · 4,055 mm | 168.9 in · 4,290 mm | +6% MF 1014 (A) |
| Width declared | 66.1–80.7 in · 1,680–2,050 mm | 85.0 in · 2,160 mm | differs |
| Ground clearance declared | 23.6 in · 600 mm | 15.2–19.7 in · 385–500 mm | differs |
| Fuel tank declared | 116.2 qt · 110.0 L | 179.6 qt · 170.0 L | +55% MF 1014 (A) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Lamborghini R-955 (DT) sources
- Source: Traktorenlexikon, “Lamborghini 955 DT”
Massey Ferguson MF 1014 (A) sources
- Source: Traktorenlexikon, “Massey Ferguson MF 1014”
- Source: Traktorenlexikon, “Massey Ferguson MF 399”