12 material differences
Tractor oneHanomag Robust 901 A (S)1969–1970No measured PTO figureTractor twoMassey Ferguson MF 1014 (A)1978–1990No measured PTO figure
Which should you choose?
Read our verdict on the Robust 901 A (S) and the MF 1014 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
12 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | Robust 901 A (S) | MF 1014 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 91 hp | 91 hp | — |
| Engine declared | Hanomag D162 R2 | Perkins A 6.354-4 | differs |
| Displacement declared | 4.71 L | 5.80 L | +23% MF 1014 (A) |
| Maximum torque declared | 207 lb·ft · 281 N·m | 295 lb·ft · 400 N·m | +42% MF 1014 (A) |
| Transmission | |||
| Top speed declared | 12.3–16.9 mph · 19.87–27.15 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | Double clutch for transmission and PTO | Dry and air-cooled double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 8.5 gpm · 32 L/min | 14.0 gpm · 53.0 L/min | +66% MF 1014 (A) |
| Pressure declared | — | 1,697 psi · 117 bar | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 8,223–8,885 lb · 3,730–4,030 kg | 9,976 lb · 4,525 kg | differs |
| Wheelbase declared | 97.4–98.8 in · 2,475–2,510 mm | 104.7 in · 2,660 mm | differs |
| Length declared | 157.1 in · 3,990 mm | 168.9 in · 4,290 mm | +8% MF 1014 (A) |
| Width declared | 79.3–84.6 in · 2,015–2,150 mm | 85.0 in · 2,160 mm | differs |
| Ground clearance declared | 12.6 in · 320 mm | 15.2–19.7 in · 385–500 mm | differs |
| Turning radius, braked declared | 13.5 ft · 4.10 m | — | — |
| Fuel tank declared | 132.1 qt · 125 L | 179.6 qt · 170.0 L | +36% MF 1014 (A) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Hanomag Robust 901 A (S) sources
- Source: Traktorenlexikon, “Hanomag Robust 901 A (S)”
- Source: Traktorenlexikon, “Hanomag Robust 901 (S)”
Massey Ferguson MF 1014 (A) sources
- Source: Traktorenlexikon, “Massey Ferguson MF 1014”
- Source: Traktorenlexikon, “Massey Ferguson MF 399”