- Rigid chassis
- WhichTractor size: High-power
- Not independently tested
- 1999–2002
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Massey Ferguson MF 8260 A Full specifications
VALMET 634 DSBAE six-cylinder diesel. The manufacturer claimed 207.3 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
207.3 hp
154.6 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Massey Ferguson MF 8260”, claimed
- Weight
- 17,990 lb
- 3-point lift
- 22,931 lb
- Hyd. flow
- 33.1 gpm
- Top speed
- 24.9 mph
Massey Ferguson MF 8260 A specs: key facts
The Massey Ferguson MF 8260 A was built from 1999 to 2002.
The Massey Ferguson MF 8260 A has a claimed engine power (gross or net not stated) of 154.6 kW (207.3 hp); it has no measured PTO figure.
The Massey Ferguson MF 8260 A was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.
The Massey Ferguson MF 8260 A has a VALMET 634 DSBAE engine, a 6-cylinder 7.37 L diesel unit.Source 1
The Massey Ferguson MF 8260 A weighs 8,160 kg (17,990 lb) unladen.
The Massey Ferguson MF 8260 A has an independent rear PTO running at 540/1000 rpm.
The three-point hitch of the Massey Ferguson MF 8260 A lifts 10,401 kg (22,931 lb) at the lower-link ends.
The hydraulic pump of the Massey Ferguson MF 8260 A delivers 125.2 L/min (33.1 gpm).
Source · Traktorenlexikon, “Massey Ferguson MF 8260”
How much horsepower does an MF 8260 A have?
The only figure for the MF 8260 A is 207.3 hp (154.6 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Massey Ferguson MF 8260”
What engine is in an MF 8260 A?
An MF 8260 A has a VALMET 634 DSBAE, a 6-cylinder 7.37 L diesel engine.
| Make & model | VALMET 634 DSBAE |
|---|---|
| Cylinders | 6, liquid-cooledSource 2 |
| Displacement | 449.4 ci · 7.37 L |
| Max torque | 628 lb·ft · 852 N·m @ 1,298 rpmSource 2 |
| Electrical system | 12 VSource 2 |
Source · Traktorenlexikon, “Massey Ferguson MF 8250”
How much will an MF 8260 A lift, and what is its hydraulic flow?
An MF 8260 A lifts 22,931 lb (10,401 kg) at the lower-link ends.
| Pump flow | 33.1 gpm · 125.2 L/min |
|---|---|
| Pressure | 3,205 psi · 221 bar |
| Lift at ends | 22,931 lb · 10,401 kg |
| Rear PTO | Independent, engine-driven, 540/1000 rpm @ 1,993 engine rpmEngages under load |
Source · Traktorenlexikon, “Massey Ferguson MF 8260”
What transmission does an MF 8260 A have?
Transmission specifications for the MF 8260 A are below.
| Clutch | Pedal operated hydraulic FUNK multi-disc clutch |
|---|---|
| Brakes | Hydraulically operated wet Girling full disc brake acting on differential side shafts |
| Steering | Hydrostatic DANFOSS steering type OSPC-LSD with double-acting steering cylinder |
| Top speed | 24.9 mph · 40 km/h |
Source · Traktorenlexikon, “Massey Ferguson MF 8260”
How much does an MF 8260 A weigh?
An MF 8260 A weighs 17,990 lb (8,160 kg) unladen.
| Unladen weight | 17,990 lb · 8,160 kgtwo-wheel-drive version |
|---|---|
| Wheelbase | 121.5 in · 3,087 mmtwo-wheel-drive version |
| Length | 206.3 in · 5,240 mm |
| Width | 99.1 in · 2,518 mm |
| Height | 120.8 in · 3,068 mm |
| Ground clearance | 16.7 in · 425 mm |
| Front track | 64.8–88.6 in · 1,645–2,250 mmtwo-wheel-drive version |
| Rear track | 63.4–74.8 in · 1,610–1,900 mm |
Source · Traktorenlexikon, “Massey Ferguson MF 8260”
Which tractors compare with an MF 8260 A?
Within 10% of its 207.3 hp of claimed engine power, the same type, and first built within 15 years of it.
- John Deere 8200 T207.3 hp engine, claimed · 1997–1998Side by side with the MF 8260 A →
- Fendt 924 Vario207 hp engine, claimed · 2006–2014Side by side with the MF 8260 A →
- Agco RT 180 A209.1 hp engine, claimed · 2009–2011Side by side with the MF 8260 A →
- Case-IH Puma 210210.1 hp engine, claimed · 2007–2011Side by side with the MF 8260 A →
- New Holland T 7060210.1 hp engine, claimed · 2007–2011Side by side with the MF 8260 A →
- AGCO-ALLIS 9775204.1 hp engine, claimed · 1998–2001Side by side with the MF 8260 A →
Everything else people ask
Is an MF 8260 A two-wheel drive or four-wheel drive?
The Massey Ferguson MF 8260 A was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.
What PTO does an MF 8260 A have?
An MF 8260 A has a independent 540/1000 rpm rear PTO.
Where this page comes from
Compiled from Traktorenlexikon, “Massey Ferguson MF 8250”; and Traktorenlexikon, “Massey Ferguson MF 8260”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Massey Ferguson MF 8250 — CC BY-SA 4.0, WIKIBOOKS-TL-87687 · revision 992233. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: Massey Ferguson MF 8260 — CC BY-SA 4.0, WIKIBOOKS-TL-87708 · revision 992234. Wikibooks contributors (Traktorenlexikon). Original document