10 material differences · fewer than 12
Tractor oneMassey Ferguson MF 8260 A1999–2002No measured PTO figureTractor twoNew Holland-Fiat G 2101993–2003No measured PTO figure
Which should you choose?
Read our verdict on the MF 8260 A and the G 210 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | MF 8260 A | G 210 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 207.3 hp | 207.3 hp | — |
| Engine declared | VALMET 634 DSBAE | New Holland VA 456 TC/AC | differs |
| Displacement declared | 7.37 L | 7.49 L | — |
| Maximum torque declared | 628 lb·ft · 852 N·m | 696 lb·ft · 943 N·m | +11% G 210 |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | Pedal operated hydraulic FUNK multi-disc clutch | Electro-hydraulically operated Funk multi-disc clutch running in an oil bath | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 33.1 gpm · 125.2 L/min | 27.4 gpm · 103.9 L/min | +21% MF 8260 A |
| Pressure declared | 3,205 psi · 221 bar | 2,799 psi · 193 bar | +15% MF 8260 A |
| Rear PTO speeds declared | 540/1000 rpm | 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 17,990 lb · 8,160 kg | 19,842 lb · 9,000 kg | +10% G 210 |
| Maximum permissible mass declared | — | 30,093 lb · 13,650 kg | — |
| Wheelbase declared | 121.5 in · 3,087 mm | 122.6 in · 3,115 mm | — |
| Length declared | 206.3 in · 5,240 mm | 230.3 in · 5,850 mm | +12% G 210 |
| Width declared | 99.1 in · 2,518 mm | 100.8 in · 2,560 mm | — |
| Ground clearance declared | 16.7 in · 425 mm | 20.0 in · 509 mm | +20% G 210 |
| Turning radius, braked declared | — | 14.4 ft · 4.40 m | — |
| Fuel tank declared | 433.2 qt · 410 L | 439.6 qt · 416.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Massey Ferguson MF 8260 A sources
- Source: Traktorenlexikon, “Massey Ferguson MF 8260”
- Source: Traktorenlexikon, “Massey Ferguson MF 8250”
New Holland-Fiat G 210 sources
- Source: Traktorenlexikon, “Fiatagri G210”