12 material differences
Tractor oneMassey Ferguson MF 8260 A1999–2002No measured PTO figureTractor twoNew Holland TG 210 (Traktorenlexikon)2002–2005No measured PTO figure
Which should you choose?
Read our verdict on the MF 8260 A and the TG 210 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
12 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | MF 8260 A | TG 210 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 207.3 hp | 207.2 hp | — |
| Engine declared | VALMET 634 DSBAE | CUMMINS 6 TAA-830 | differs |
| Displacement declared | 7.37 L | 8.27 L | +12% TG 210 |
| Maximum torque declared | 628 lb·ft · 852 N·m | 679 lb·ft · 921 N·m | +8% TG 210 |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 24.9 mph · 40 km/h | — |
| Clutch declared | Pedal operated hydraulic FUNK multi-disc clutch | Electro-hydraulically operated wet Case-IH multi-plate clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 33.1 gpm · 125.2 L/min | 38.6 gpm · 146.1 L/min | +17% TG 210 |
| Pressure declared | 3,205 psi · 221 bar | 3,031 psi · 209 bar | +6% MF 8260 A |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 17,990 lb · 8,160 kg | 20,466 lb · 9,283 kg | +14% TG 210 |
| Maximum permissible mass declared | — | 30,865 lb · 14,000 kg | — |
| Wheelbase declared | 121.5 in · 3,087 mm | 121.2 in · 3,078 mm | — |
| Length declared | 206.3 in · 5,240 mm | 227.4 in · 5,775 mm | +10% TG 210 |
| Width declared | 99.1 in · 2,518 mm | 120.0–150.0 in · 3,048–3,810 mm | differs |
| Ground clearance declared | 16.7 in · 425 mm | 13.8 in · 350 mm | +21% MF 8260 A |
| Fuel tank declared | 433.2 qt · 410 L | 519.9 qt · 492.0 L | +20% TG 210 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Massey Ferguson MF 8260 A sources
Source
- Source: Traktorenlexikon, “Massey Ferguson MF 8260”
- Source: Traktorenlexikon, “Massey Ferguson MF 8250”
New Holland TG 210 (Traktorenlexikon) sources
Source
- Source: Traktorenlexikon, “New Holland TG 210”
- Source: Traktorenlexikon, “Case-IH MX210”