- WhichTractor size: Standard-size
- No lab test on file
- 2009–2012
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Massey Ferguson 7497 specs: hp, weight, years
AGCO-SISU-Power 74 CTA (Tier-III) six-cylinder diesel. The manufacturer claimed 202.4 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
202.4 hp
150.9 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Massey Ferguson MF 7497”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
- Weight
- 16,372 lb
- 3-point lift
- 20,907 lb
- Hyd. flow
- 31.4 gpm
- Top speed
- 24.9–31.1 mph
Massey Ferguson 7497 specs: key facts
The Massey Ferguson 7497 was built from 2009 to 2012.
The Massey Ferguson 7497 has a claimed engine power (gross or net not stated) of 150.9 kW (202.4 hp); it has no measured PTO figure.
The Massey Ferguson 7497 is four-wheel drive (4WD).
The Massey Ferguson 7497 has a AGCO-SISU-Power 74 CTA (Tier-III) engine, a 6-cylinder 7.37 L diesel unit.
The Massey Ferguson 7497 weighs 7,426 kg (16,372 lb) unladen.
The Massey Ferguson 7497 has a rear PTO running at 540 rpm / 1000 rpm.
The three-point hitch of the Massey Ferguson 7497 lifts 9,483 kg (20,907 lb) at the lower-link ends.
The hydraulic pump of the Massey Ferguson 7497 delivers 119.0 L/min (31.4 gpm).
Source · Traktorenlexikon, “Massey Ferguson MF 7497”
How does the 7497 compare with its class?
- Limitation:
The power figure is a manufacturer claim, not a measurement. No laboratory test report exists for this machine. Of the 120 tractors within 10% of its power, 16% carry one.
Derived by WhichTractor from 120 comparable records. How we work this out
How much horsepower does a 7497 have?
The only figure for the 7497 is 202.4 hp (150.9 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Massey Ferguson MF 7497”
What engine is in a 7497?
A 7497 has an AGCO-SISU-Power 74 CTA (Tier-III), a 6-cylinder 7.37 L diesel engine.
| Make & model | AGCO-SISU-Power 74 CTA (Tier-III) |
|---|---|
| Cylinders | 6, liquid-cooled |
| Displacement | 449.6 ci · 7.37 L |
| Max torque | 684 lb·ft · 928 N·m @ 1,400 rpm |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Massey Ferguson MF 7497”
How much will a 7497 lift, and what is its hydraulic flow?
A 7497 lifts 20,907 lb (9,483 kg) at the lower-link ends.
| System | Load sensing |
|---|---|
| Pump flow | 31.4 gpm · 119.0 L/min |
| Pressure | 2,176 psi · 150 bar |
| Lift at ends | 20,907 lb · 9,483 kg |
| Rear PTO | 540 rpm / 1000 rpm @ 2,062 engine rpm |
Source · Traktorenlexikon, “Massey Ferguson MF 7497”
What transmission does a 7497 have?
Transmission specifications for the 7497 are below.
| Steering | Hydrostatic Danfoss steering |
|---|---|
| Top speed | 24.9–31.1 mph · 40–50 km/hthe article lists alternatives |
Source · Traktorenlexikon, “Massey Ferguson MF 7497”
How much does a 7497 weigh?
A 7497 weighs 16,372 lb (7,426 kg) unladen.
| Unladen weight | 16,372 lb · 7,426 kg |
|---|---|
| Maximum permissible mass | 26,455 lb · 12,000 kg |
| Wheelbase | 118.0 in · 2,996 mm |
| Length | 199.2 in · 5,060 mm |
| Width | 98.2 in · 2,494 mm |
| Height | 120.7 in · 3,066 mm |
| Ground clearance | 18.9 in · 480 mm |
| Front track | 65.0–83.9 in · 1,650–2,130 mm |
| Rear track | 67.7–91.3 in · 1,720–2,320 mm |
Source · Traktorenlexikon, “Massey Ferguson MF 7497”
What oil does a 7497 take, and how much?
A 7497 engine takes 21.9 qt (20.7 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.
| System | Capacity |
|---|---|
| Engine oil | 21.9 qt · 20.7 LSource: Traktorenlexikon, “Massey Ferguson MF 7497” · single source, not independently verified |
| Transmission | 61.3 qt · 58.0 LSource: Traktorenlexikon, “Massey Ferguson MF 7497” · single source, not independently verified |
| Hydraulic | 105.7 qt · 100.0 LSource: Traktorenlexikon, “Massey Ferguson MF 7497” · single source, not independently verified |
| Front axle | 10.6 qt · 10.0 LSource: Traktorenlexikon, “Massey Ferguson MF 7497” · single source, not independently verified |
| Cooling system | 35.9 qt · 34.0 LSource: Traktorenlexikon, “Massey Ferguson MF 7497” · single source, not independently verified |
Always confirm against the operator’s manual for your machine before service.
Which tractors compare with a 7497?
Within 10% of its 202.4 hp of claimed engine power, the same type, and first built within 15 years of it.
- Deutz-Fahr Agrotron 200 (New)202.4 hp engine, claimed · 2004–2007Side by side with the 7497 →
- Fendt 820 Vario202 hp engine, claimed · 2006–2011Side by side with the 7497 →
- Fendt 820 Vario greentec204 hp engine, claimed · 2004–2011Side by side with the 7497 →
- AGCO-ALLIS 9775204.1 hp engine, claimed · 1998–2001Side by side with the 7497 →
- Case-IH 7230 Magnum204.1 hp engine, claimed · 1994–1997Side by side with the 7497 →
- Agco DT-200200.2 hp engine, claimed · 2002–2004Side by side with the 7497 →
Common questions about the Massey Ferguson 7497
Is a 7497 two-wheel drive or four-wheel drive?
The Massey Ferguson 7497 is four-wheel drive (4WD).
What PTO does a 7497 have?
A 7497 has a 540 rpm / 1000 rpm rear PTO.
Sources and how this page was built
Compiled from Traktorenlexikon, “Massey Ferguson MF 7497”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Massey Ferguson MF 7497 — CC BY-SA 4.0, WIKIBOOKS-TL-87514 · revision 992274. Wikibooks contributors (Traktorenlexikon). Original document