6 material differences · fewer than 12
Tractor oneFendt 820 Vario greentec2004–2011No measured PTO figureTractor twoMassey Ferguson MF 74972009–2012No measured PTO figure
Which should you choose?
Read our verdict on the 820 Vario greentec and the MF 7497 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 7 fields identical or within 5%, which is not counted as material
| Field | 820 Vario greentec | MF 7497 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 204 hp | 202.4 hp | — |
| Engine declared | — | AGCO-SISU-Power 74 CTA (Tier-III) | — |
| Displacement declared | — | 7.37 L | — |
| Maximum torque declared | 660 lb·ft · 895 N·m | 684 lb·ft · 928 N·m | — |
| Transmission | |||
| Top speed declared | 31.1 mph · 50 km/h | 24.9–31.1 mph · 40–50 km/h | differs |
| Hydraulics & hitch | |||
| Hydraulic control declared | Load sensing | Load sensing | — |
| Pump flow declared | — | 31.4 gpm · 119.0 L/min | — |
| Pressure declared | 2,901 psi · 200 bar | 2,176 psi · 150 bar | +33% 820 Vario greentec |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540 rpm / 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 15,840 lb · 7,185 kg | 16,372 lb · 7,426 kg | — |
| Maximum permissible mass declared | 27,558 lb · 12,500 kg | 26,455 lb · 12,000 kg | — |
| Wheelbase declared | 107.1 in · 2,720 mm | 118.0 in · 2,996 mm | +10% MF 7497 |
| Length declared | 187.1 in · 4,753 mm | 199.2 in · 5,060 mm | +6% MF 7497 |
| Width declared | 101.2 in · 2,570 mm | 98.2 in · 2,494 mm | — |
| Ground clearance declared | 22.3 in · 566 mm | 18.9 in · 480 mm | +18% 820 Vario greentec |
| Fuel tank declared | 359.3 qt · 340 L | 401.5 qt · 380.0 L | +12% MF 7497 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt 820 Vario greentec sources
- Source: Traktorenlexikon, “Fendt 820 Vario greentec”
Massey Ferguson MF 7497 sources
- Source: Traktorenlexikon, “Massey Ferguson MF 7497”