• Rigid chassis
  • WhichTractor size: Standard-size
  • No lab test on file
  • 2002–2004

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Agco DT-200 specs: hp, weight, years

CUMMINS CTA-8.3 six-cylinder diesel. The manufacturer claimed 200.2 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

200.2 hp

149.3 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “AGCO DT 200”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
19,630 lb
3-point lift
19,709 lb
Hyd. flow
29.1 gpm
Top speed
24.9 mph

Agco DT-200 specs: key facts

  • The Agco DT-200 was built from 2002 to 2004.

  • The Agco DT-200 has a claimed engine power (gross or net not stated) of 149.3 kW (200.2 hp); it has no measured PTO figure.

  • The Agco DT-200 is four-wheel drive (4WD).

  • The Agco DT-200 has a CUMMINS CTA-8.3 engine, a 6-cylinder 8.27 L diesel unit.Source 1

  • The Agco DT-200 weighs 8,904 kg (19,630 lb) unladen.

  • The Agco DT-200 has an independent rear PTO running at 1000 rpm.

  • The three-point hitch of the Agco DT-200 lifts 8,940 kg (19,709 lb) at the lower-link ends.

  • The hydraulic pump of the Agco DT-200 delivers 110.2 L/min (29.1 gpm).

Source · Traktorenlexikon, “AGCO DT 200”

How does the DT-200 compare with its class?

  • Strength:

    A maximum engine torque of 970 N·m is high for its class — 18% above the median of 820 N·m across the 95 machines within 10% of its power that hold this figure.

  • Limitation:

    The power figure is a manufacturer claim, not a measurement. No laboratory test report exists for this machine. Of the 118 tractors within 10% of its power, 15% carry one.

Derived by WhichTractor from 118 comparable records. How we work this out

Illustration of the 2002–2004 Agco DT-200, a 200 hp farm tractor, a drawing generated from its specification record
Illustration — not a photograph

How much horsepower does a DT-200 have?

The only figure for the DT-200 is 200.2 hp (149.3 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
200.2 hp

Source · Traktorenlexikon, “AGCO DT 200”

What engine is in a DT-200?

A DT-200 has a CUMMINS CTA-8.3, a 6-cylinder 8.27 L diesel engine.

Engine — DT-200 engine specifications
Make & modelCUMMINS CTA-8.3Source 1
Cylinders6, liquid-cooledSource 1
Displacement504.5 ci · 8.27 LSource 1
Max torque715 lb·ft · 970 N·m @ 1,300 rpm
InjectionDirect injection
Electrical system12 V

Source · Traktorenlexikon, “AGCO DT 200”

How much will a DT-200 lift, and what is its hydraulic flow?

A DT-200 lifts 19,709 lb (8,940 kg) at the lower-link ends of its Category 3 three-point hitch.

Hydraulics & PTO — DT-200 hydraulics and PTO specifications
Pump flow29.1 gpm · 110.2 L/min
Pressure2,350 psi · 162 bar
Hitch categoryCategory 3
Lift at ends19,709 lb · 8,940 kg
Rear PTOIndependent, engine-driven, 1000 rpmEngages under load
PTO shaft1 3/4- 20 teilig

Source · Traktorenlexikon, “AGCO DT 200”

What transmission does a DT-200 have?

Transmission specifications for the DT-200 are below.

Transmission — DT-200 transmission specifications
ClutchPedal operated wet multi disc clutch
SteeringHydrostatic Danfoss steering type OSPC
Top speed24.9 mph · 40 km/h

Source · Traktorenlexikon, “AGCO DT 200”

How much does a DT-200 weigh?

A DT-200 weighs 19,630 lb (8,904 kg) unladen.

Weights & dimensions — DT-200 weights and dimensions
Unladen weight19,630 lb · 8,904 kg
Wheelbase121.0 in · 3,073 mm
Length203.0 in · 5,156 mm
Width98.2 in · 2,494 mm
Height120.0 in · 3,048 mm
Ground clearance17.5 in · 445 mm
Front track60.0–88.0 in · 1,524–2,235 mm
Rear track64.1–128.9 in · 1,628–3,274 mm

Source · Traktorenlexikon, “AGCO DT 200”

What oil does a DT-200 take, and how much?

A DT-200 engine takes 20.0 qt (18.9 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

DT-200 fluid capacities, grades and service intervals
SystemCapacity
Engine oil20.0 qt · 18.9 LSource: Traktorenlexikon, “AGCO DT 200” · single source, not independently verified
Transmission15.0 qt · 14.2 LSource: Traktorenlexikon, “AGCO DT 200” · single source, not independently verified
Front axle6.9 qt · 6.5 LSource: Traktorenlexikon, “AGCO DT 200” · single source, not independently verified
Cooling system28.0 qt · 26.5 LSource: Traktorenlexikon, “AGCO DT 200” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

Which tractors compare with a DT-200?

Within 10% of its 200.2 hp of claimed engine power, the same type, and first built within 15 years of it.

Common questions about the Agco DT-200

Is a DT-200 two-wheel drive or four-wheel drive?

The Agco DT-200 is four-wheel drive (4WD).

What PTO does a DT-200 have?

A DT-200 has a independent 1000 rpm rear PTO on a 1 3/4- 20 teilig shaft.

Sources and how this page was built

Compiled from Traktorenlexikon, “AGCO DT 180”; and Traktorenlexikon, “AGCO DT 200”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: AGCO DT 180 — CC BY-SA 4.0, WIKIBOOKS-TL-122921 · revision 1088475. Wikibooks contributors (Traktorenlexikon). Original document
  2. Traktorenlexikon: AGCO DT 200 — CC BY-SA 4.0, WIKIBOOKS-TL-122922 · revision 1088476. Wikibooks contributors (Traktorenlexikon). Original document