9 material differences · fewer than 12

Tractor oneAgco DT-2002002–2004No measured PTO figureTractor twoMassey Ferguson MF 74972009–2012No measured PTO figure

Which should you choose?

We will not advise between these two machines, because they were not built in overlapping years (2002–2004; 2009–2012). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

9 material differences · 6 fields identical or within 5%, which is not counted as material

Agco DT-200 and Massey Ferguson MF 7497, field by field
FieldDT-200MF 7497Gap
Engine
Engine power, claimed claimed200.2 hp202.4 hp—
Engine declaredCUMMINS CTA-8.3AGCO-SISU-Power 74 CTA (Tier-III)differs
Displacement declared8.27 L7.37 L+12% DT-200
Maximum torque declared715 lb·ft · 970 N·m684 lb·ft · 928 N·m—
Transmission
Top speed declared24.9 mph · 40 km/h24.9–31.1 mph · 40–50 km/hdiffers
Clutch declaredPedal operated wet multi disc clutch——
Hydraulics & hitch
Hydraulic control declared—Load sensing—
Pump flow declared29.1 gpm · 110.2 L/min31.4 gpm · 119.0 L/min+8% MF 7497
Pressure declared2,350 psi · 162 bar2,176 psi · 150 bar+8% DT-200
Rear PTO speeds declared1000 rpm540 rpm / 1000 rpmdiffers
Weight & dimensions
Unladen weight declared19,630 lb · 8,904 kg16,372 lb · 7,426 kg+20% DT-200
Maximum permissible mass declared—26,455 lb · 12,000 kg—
Wheelbase declared121.0 in · 3,073 mm118.0 in · 2,996 mm—
Length declared203.0 in · 5,156 mm199.2 in · 5,060 mm—
Width declared98.2 in · 2,494 mm98.2 in · 2,494 mm—
Height, over the cab declared120.0 in · 3,048 mm120.7 in · 3,066 mm—
Ground clearance declared17.5 in · 445 mm18.9 in · 480 mm+8% MF 7497
Fuel tank declared479.7 qt · 454.0 L401.5 qt · 380.0 L+19% DT-200

Agco DT-200 sources

Source
  • Source: Traktorenlexikon, “AGCO DT 200”
  • Source: Traktorenlexikon, “AGCO DT 180”

Massey Ferguson MF 7497 sources

Source
  • Source: Traktorenlexikon, “Massey Ferguson MF 7497”