7 material differences · fewer than 12
Tractor oneAGCO-ALLIS 97751998–2001No measured PTO figureTractor twoMassey Ferguson MF 74972009–2012No measured PTO figure
Which should you choose?
We will not advise between these two machines, because they were not built in overlapping years (1998–2001; 2009–2012). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
7 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 9775 | MF 7497 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 204.1 hp | 202.4 hp | — |
| Engine declared | INTERNATIONAL-NAVISTAR DTA-530 | AGCO-SISU-Power 74 CTA (Tier-III) | differs |
| Displacement declared | — | 7.37 L | — |
| Maximum torque declared | — | 684 lb·ft · 928 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 24.9–31.1 mph · 40–50 km/h | differs |
| Clutch declared | Oil-cooled wet multi-plate clutch | — | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | — | — |
| Hydraulic control declared | — | Load sensing | — |
| Pump flow declared | — | 31.4 gpm · 119.0 L/min | — |
| Pressure declared | 3,046 psi · 210 bar | 2,176 psi · 150 bar | +40% 9775 |
| Rear PTO speeds declared | 1000 rpm | 540 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 18,786 lb · 8,521 kg | 16,372 lb · 7,426 kg | +15% 9775 |
| Maximum permissible mass declared | — | 26,455 lb · 12,000 kg | — |
| Wheelbase declared | 112.5 in · 2,858 mm | 118.0 in · 2,996 mm | — |
| Length declared | 203.0 in · 5,156 mm | 199.2 in · 5,060 mm | — |
| Width declared | 98.2 in · 2,494 mm | 98.2 in · 2,494 mm | — |
| Height, over the cab declared | 121.0 in · 3,073 mm | 120.7 in · 3,066 mm | — |
| Ground clearance declared | 17.5 in · 445 mm | 18.9 in · 480 mm | +8% MF 7497 |
| Fuel tank declared | 479.7 qt · 454.0 L | 401.5 qt · 380.0 L | +19% 9775 |
AGCO-ALLIS 9775 sources
Source
- Source: Traktorenlexikon, “AGCO-Allis 9775”
Massey Ferguson MF 7497 sources
Source
- Source: Traktorenlexikon, “Massey Ferguson MF 7497”