WhichTractor
  • Rigid chassis
  • WhichTractor size: Utility
  • Not independently tested
  • 1969–1972

WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Leyland 344 Full specifications

LEYLAND-MOTORS 34 TD four-cylinder diesel. The manufacturer claimed 55 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

55 hp

41 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Leyland 344”, claimed

Weight
4,685 lb
3-point lift
3,351 lb
Hyd. flow
8.2 gpm
Top speed
15.5 mph

Leyland 344 specs: key facts

  • The Leyland 344 was built from 1969 to 1972.

  • The Leyland 344 has a claimed engine power (gross or net not stated) of 41 kW (55 hp); it has no measured PTO figure.

  • The Leyland 344 is two-wheel drive (2WD).

  • The Leyland 344 has a LEYLAND-MOTORS 34 TD engine, a 4-cylinder 3.40 L diesel unit.

  • The Leyland 344 weighs 2,125 kg (4,685 lb) unladen.

  • The Leyland 344 has an independent rear PTO running at 540 rpm.

  • The three-point hitch of the Leyland 344 lifts 1,520 kg (3,351 lb) at the lower-link ends.

  • The hydraulic pump of the Leyland 344 delivers 31.0 L/min (8.2 gpm).

Source · Traktorenlexikon, “Leyland 344”

How much horsepower does a 344 have?

The only figure for the 344 is 55 hp (41 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
55 hp

Source · Traktorenlexikon, “Leyland 344”

What engine is in a 344?

A 344 has a LEYLAND-MOTORS 34 TD, a 4-cylinder 3.40 L diesel engine.

Engine — 344 engine specifications
Make & modelLEYLAND-MOTORS 34 TD
Cylinders4, liquid-cooled
Displacement207.6 ci · 3.40 L
Max torque143 lb·ft · 194 N·m @ 1,350 rpm
Electrical system12 V

Source · Traktorenlexikon, “Leyland 344”

How much will a 344 lift, and what is its hydraulic flow?

A 344 lifts 3,351 lb (1,520 kg) at the lower-link ends.

Hydraulics & PTO — 344 hydraulics and PTO specifications
Pump flow8.2 gpm · 31.0 L/min
Lift at ends3,351 lb · 1,520 kg
Rear PTOIndependent, engine-driven, 540 rpm @ 1,813 engine rpmEngages under load
PTO shaft1 3/8"- 6 splines

Source · Traktorenlexikon, “Leyland 344”

What transmission does a 344 have?

Transmission specifications for the 344 are below.

Transmission — 344 transmission specifications
ClutchDry BORG & BECK double clutch
Top speed15.5 mph · 25 km/h

Source · Traktorenlexikon, “Leyland 344”

How much does a 344 weigh?

A 344 weighs 4,685 lb (2,125 kg) unladen.

Weights & dimensions — 344 weights and dimensions
Unladen weight4,685 lb · 2,125 kg
Wheelbase80.0 in · 2,032 mm
Length120.1 in · 3,050 mm
Width71.7 in · 1,820 mm
Height85.5 in · 2,172 mm
Ground clearance16.1 in · 409 mm
Front track52.0–72.0 in · 1,321–1,829 mm
Rear track56.0–80.0 in · 1,422–2,032 mm
Turning radius, braked10.8 ft · 3.30 m

Source · Traktorenlexikon, “Leyland 344”

Which tractors compare with a 344?

Within 10% of its 45.0 hp at the PTO (claimed), the same type, and first built within 15 years of it.

Everything else people ask

Is a 344 two-wheel drive or four-wheel drive?

The Leyland 344 is two-wheel drive (2WD).

What PTO does a 344 have?

A 344 has a independent 540 rpm rear PTO on a 1 3/8"- 6 splines shaft.

Where this page comes from

Compiled from Traktorenlexikon, “Leyland 344”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Leyland 344 — CC BY-SA 4.0, WIKIBOOKS-TL-116098 · revision 993604. Wikibooks contributors (Traktorenlexikon). Original document