- Rigid chassis
- WhichTractor size: Utility
- No lab test on file
- 1969–1972
WhichTractor size, not the maker’s category
Leyland 344 Hydraulics & PTO specs
12 hydraulics and PTO values on record for the 344.
Engine power, claimed · gross or net not stated
55 hp
41 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Leyland 344”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
How much will a 344 lift?
A 344 lifts 3,351 lb (1,520 kg) at the lower-link ends.
| Pump flow | 8.2 gpm · 31.0 L/min |
|---|---|
| Rear remote valves | 1 |
| Lift capacity at ball ends | 3,351 lb · 1,520 kg |
| Lift capacity 610 mm behind ends | 2,000 lb · 907 kg |
| Hitch control | Lifting, holding, lowering, floating position and draft control |
Source · Traktorenlexikon, “Leyland 344”
What PTO does a 344 have?
A 344 has a 540 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540 rpm |
| Engine speed at 540 PTO | 1,813 rpm |
| Rear PTO shaft | 1 3/8"- 6 splines |
| PTO power, claimed | 45.0 hp · 33.5 kWClaimed; standard not stated by the source |
Source · Traktorenlexikon, “Leyland 344”
Sources and how this page was built
12 hydraulics and PTO values from Traktorenlexikon, “Leyland 344”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Leyland 344 — CC BY-SA 4.0, WIKIBOOKS-TL-116098 · revision 993604. Wikibooks contributors (Traktorenlexikon). Original document