9 material differences · fewer than 12
Tractor oneHürlimann H-356 (A)1983–1986No measured PTO figureTractor twoLeyland 3441969–1972No measured PTO figure
Which should you choose?
Read our verdict on the H-356 (A) and the 344 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | H-356 (A) | 344 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 54.2 hp | 55 hp | — |
| Engine declared | Hürlimann H-916.3 W | LEYLAND-MOTORS 34 TD | differs |
| Displacement declared | 2.75 L | 3.40 L | +24% 344 |
| Maximum torque declared | 136 lb·ft · 185 N·m | 143 lb·ft · 194 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5 mph · 25 km/h | +20% H-356 (A) |
| Clutch declared | Pedal-operated dry SLH single-disc clutch as driving clutch | Dry BORG & BECK double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 8.3 gpm · 31.6 L/min | 8.2 gpm · 31.0 L/min | — |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,423 lb · 2,460 kg | 4,685 lb · 2,125 kg | +16% H-356 (A) |
| Wheelbase declared | 86.6 in · 2,200 mm | 80.0 in · 2,032 mm | +8% H-356 (A) |
| Length declared | 149.6 in · 3,800 mm | 120.1 in · 3,050 mm | +25% H-356 (A) |
| Width declared | 73.6 in · 1,870 mm | 71.7 in · 1,820 mm | — |
| Ground clearance declared | 14.8 in · 375 mm | 16.1 in · 409 mm | +9% 344 |
| Turning radius, braked declared | — | 10.8 ft · 3.30 m | — |
| Fuel tank declared | 74.0 qt · 70.0 L | 76.8 qt · 72.7 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Hürlimann H-356 (A) sources
- Source: Traktorenlexikon, “Hürlimann H 356”
Leyland 344 sources
- Source: Traktorenlexikon, “Leyland 344”