6 material differences · fewer than 12
Tractor oneLandini 7830 (DT) TL-20 N/F (TL-20 DT/F)1983–1987No measured PTO figureTractor twoSteyr 8085 a RS-21988–1993No measured PTO figure
Which should you choose?
Read our verdict on the 7830 (DT) TL-20 N/F (TL-20 DT/F) and the 8085 a RS-2 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 7 fields identical or within 5%, which is not counted as material
| Field | 7830 (DT) TL-20 N/F (TL-20 DT/F) | 8085 a RS-2 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 71 hp | 71 hp | — |
| Engine declared | Perkins A 4.236 | Steyr WD-411.44 | differs |
| Displacement declared | 3.87 L | 3.46 L | +12% 7830 (DT) TL-20 N/F (TL-20 DT/F) |
| Maximum torque declared | 202 lb·ft · 274 N·m | 195 lb·ft · 265 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | — | Dry Fichtel & Sachs double clutch or Luk | — |
| Hydraulics & hitch | |||
| Pump flow declared | 10.2 gpm · 38.7 L/min | 10.7 gpm · 40.5 L/min | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 5,986 lb · 2,715 kg | 6,393 lb · 2,900 kg | +7% 8085 a RS-2 |
| Maximum permissible mass declared | — | 9,921 lb · 4,500 kg | — |
| Wheelbase declared | 87.0 in · 2,210 mm | 84.4 in · 2,145 mm | — |
| Length declared | 147.6 in · 3,750 mm | 144.9 in · 3,680 mm | — |
| Width declared | 78.7 in · 1,999 mm | 73.7 in · 1,871 mm | +7% 7830 (DT) TL-20 N/F (TL-20 DT/F) |
| Ground clearance declared | 21.1 in · 535 mm | 15.6 in · 395 mm | +35% 7830 (DT) TL-20 N/F (TL-20 DT/F) |
| Turning radius, braked declared | 12.8 ft · 3.89 m | — | — |
| Fuel tank declared | 63.9 qt · 60.5 L | 63.4 qt · 60.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Landini 7830 (DT) TL-20 N/F (TL-20 DT/F) sources
- Source: Traktorenlexikon, “Landini 7830 (DT)”
- Source: Traktorenlexikon, “Massey Ferguson MF 168 & MF 168A”
Steyr 8085 a RS-2 sources
- Source: Traktorenlexikon, “Steyr 8085”