5 material differences · fewer than 12
Tractor oneInternational Harvester 9331990No measured PTO figureTractor twoLandini 7830 (DT) TL-20 N/F (TL-20 DT/F)1983–1987No measured PTO figure
Which should you choose?
Read our verdict on the 933 and the 7830 (DT) TL-20 N/F (TL-20 DT/F) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
5 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | 933 | 7830 (DT) TL-20 N/F (TL-20 DT/F) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 71 hp | 71 hp | — |
| Engine declared | INTERNATIONAL-HARVESTER D-239 | Perkins A 4.236 | differs |
| Displacement declared | 3.91 L | 3.87 L | — |
| Maximum torque declared | — | 202 lb·ft · 274 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6 mph · 30 km/h | differs |
| Hydraulics & hitch | |||
| Pump flow declared | — | 10.2 gpm · 38.7 L/min | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 6,239 lb · 2,830 kg | 5,986 lb · 2,715 kg | — |
| Wheelbase declared | 84.6 in · 2,150 mm | 87.0 in · 2,210 mm | — |
| Length declared | 140.6 in · 3,570 mm | 147.6 in · 3,750 mm | — |
| Width declared | 64.6 in · 1,640 mm | 78.7 in · 1,999 mm | +22% 7830 (DT) TL-20 N/F (TL-20 DT/F) |
| Ground clearance declared | 13.6 in · 345 mm | 21.1 in · 535 mm | +55% 7830 (DT) TL-20 N/F (TL-20 DT/F) |
| Turning radius, braked declared | — | 12.8 ft · 3.89 m | — |
| Fuel tank declared | 74.0 qt · 70 L | 63.9 qt · 60.5 L | +16% 933 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
International Harvester 933 sources
- Source: Traktorenlexikon, “IHC 933”
- Source: Traktorenlexikon, “IHC 574”
Landini 7830 (DT) TL-20 N/F (TL-20 DT/F) sources
- Source: Traktorenlexikon, “Landini 7830 (DT)”
- Source: Traktorenlexikon, “Massey Ferguson MF 168 & MF 168A”