WhichTractor
  • Vehicle type: unspecified
  • Rigid chassis
  • WhichTractor size: Standard-size
  • Lab tested ×1
  • 1999–2002

WhichTractor size, not the maker’s category

We looked and the record does not say what this machine is. How we decide what a machine is

John Deere 7510 specs: hp, weight, years

John Deere 6.068 TRW-70 six-cylinder diesel. OECD put one on a dynamometer and measured 115.1 hp at the power take-off — the number to size an implement from.

Measured at the PTO shaft

115.1 hp

Source · OECD Test 1959, measured

What “at the PTO” means, and why it matters

Drawbar hp
106.1

John Deere 7510 specs: key facts

  • The John Deere 7510 was built from 1999 to 2002 and produced 85.8 kW (115.1 hp) at the PTO, measured on OECD Test 1959.Source 1

  • The claimed engine power (gross or net not stated) of the John Deere 7510 is 99.4–99.4 kW (133.3–133.3 hp), depending on configuration.

  • The John Deere 7510 was offered in two-wheel-drive and four-wheel-drive versions.

  • The John Deere 7510 has a John Deere 6.068 TRW-70 engine, a 6-cylinder 6.79 L diesel unit.

  • The John Deere 7510 weighs 5,864–6,028 kg (12,928–13,289 lb) unladen, depending on configuration.

  • The John Deere 7510 has an independent rear PTO running at 540/1000 rpm.Source 1

  • The hydraulic pump of the John Deere 7510 delivers 101.1 L/min (26.7 gpm).

Source · Traktorenlexikon, “John Deere 7510”

Illustration of the 1999–2002 John Deere 7510, a 133 hp farm tractor, four-wheel-drive version · cab was optional — shown without it, a drawing generated from its specification record
Illustration — not a photograph · four-wheel-drive version · cab was optional — shown without it

How much horsepower does a 7510 have at the PTO?

At the PTO shaft a 7510 has 115.1 hp (85.8 kW), measured on OECD Test 1959.

PTO, measured
115.1 hp
Drawbar, measured (unballasted)
106.1 hp

Sources · OECD test report 1959, 2001; Traktorenlexikon, “John Deere 7510”

What engine is in a 7510?

A 7510 has a John Deere 6.068 TRW-70, a 6-cylinder 6.79 L diesel engine.

Engine — 7510 engine specifications
Make & modelJohn Deere 6.068 TRW-70
Cylinders6, liquid-cooledSource 1
Displacement414.2 ci · 6.79 L
Aspirationsupercharged
Max torque395 lb·ft · 535.0 N·m @ 1,302 rpmSource 1

Source · Traktorenlexikon, “John Deere 7510”

How much will a 7510 lift?

Hydraulic and PTO specifications for the 7510 are below.

Hydraulics & PTO — 7510 hydraulics and PTO specifications
SystemClosed centre, load sensingSource 2On record for 1 of 3 configurations
Pump flow26.7 gpm · 101.1 L/minSource 2On record for 1 of 3 configurations
Pressure2,538 psi · 175 barSource 2On record for 1 of 3 configurations
Rear PTO540/1000 rpm
PTO shaft35 mm, 6 splines / 35 mm, 21 splines

Source · OECD test report 1959, 2001

What transmission does a 7510 have?

Transmission specifications for the 7510 are below.

Transmission — 7510 transmission specifications
SteeringHydrostatic Eaton steering with two integrated double-acting equalizing cylindersOn record for 1 of 3 configurations
Top speed18.6–24.9 mph · 30–40 km/hOn record for 1 of 3 configurationsthe article lists alternatives

Source · Traktorenlexikon, “John Deere 7510”

How much does a 7510 weigh?

Dimensions for the 7510 are below; no sourced weight is on record yet.

Weights & dimensions — 7510 weights and dimensions
Unladen weight12,928–13,289 lb · 5,864–6,028 kgVaries by configuration: 5,864 kg or 6,028 kgOn record for 2 of 3 configurationstwo-wheel-drive versionfour-wheel-drive version
Wheelbase103.3–111.8 in · 2,625–2,840 mmVaries by configuration: 2,625 mm or 2,840 mmOn record for 2 of 3 configurationstwo-wheel-drive versionfour-wheel-drive version
Length174.6 in · 4,435 mmOn record for 1 of 3 configurations
Width110.6–118.7 in · 2,808–3,015 mmOn record for 1 of 3 configurations
Height113.4 in · 2,880 mmOn record for 1 of 3 configurations
Ground clearance14.2–15.7 in · 360–400 mmVaries by configuration: 360 mm or 400 mmOn record for 2 of 3 configurationstwo-wheel-drive versionfour-wheel-drive version
Rear track60.0–108.3 in · 1,525–2,752 mmOn record for 1 of 3 configurations

Source · Traktorenlexikon, “John Deere 7510”

What oil does a 7510 take, and how much?

A 7510 engine takes 19.5 qt (18.5 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

7510 fluid capacities, grades and service intervals
SystemCapacity
Engine oil19.5 qt · 18.5 LSource: Traktorenlexikon, “John Deere 7510” · single source, not independently verified
Transmission67.6 qt · 64.0 LSource: Traktorenlexikon, “John Deere 7510” · single source, not independently verified
Front axle15.2 qt · 14.4 LSource: Traktorenlexikon, “John Deere 7510” · single source, not independently verified
Cooling system20.1 qt · 19.0 LSource: Traktorenlexikon, “John Deere 7510” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

What did OECD measure on Test 1959?

OECD Test 1959 recorded 115.1 hp at the PTO and 106.1 hp at the drawbar. Configuration as printed: “4 WD · PowrQuad - MFWD - 16 speeds - 30 km/h”.

Test results — OECD Test 1959, 7510: measured results
PTO power, rated engine speed115.1 hp at 1,003 PTO rpm · 85.8 kW @ 2,101 engine rpm
PTO power, standard PTO speed115.1 hp at 1,003 PTO rpm · 85.8 kW @ 2,101 engine rpm
Drawbar power, unballasted106.1 hp · 79.1 kW

Source · OECD test report 1959, 2001

How much fuel does a 7510 burn per hour?

Measured on OECD Test 1959 (tested as the 7510 (4 WD)), at each condition the laboratory recorded.

Cost per hour = fuel used per hour × your fuel price (per litre, or per US gallon for the gal/h figure).

Fuel use measured on OECD Test 1959
Test conditionFuel per hour
Maximum PTO power25.16 L/h 6.65 gal/h
Rated engine speedPTO 85.8 kW (115.1 hp) at 1,003 rpm25.75 L/h 6.80 gal/h
Standard PTO speedPTO 85.8 kW (115.1 hp) at 1,003 rpm25.75 L/h 6.80 gal/h
75% load, 50% loadNot on record for this test

Source · OECD Test 1959

Which tractors compare with a 7510?

Within 10% of its 115.1 hp measured at the PTO, the same type, and first built within 15 years of it.

Common questions about the John Deere 7510

Is a 7510 two-wheel drive or four-wheel drive?

The John Deere 7510 was offered in two-wheel-drive and four-wheel-drive versions.

What PTO does a 7510 have?

A 7510 has a 540/1000 rpm rear PTO on a 35 mm, 6 splines / 35 mm, 21 splines shaft.

What implements will a 7510 run?

Size PTO implements from the measured 115.1 hp at the shaft.

Sources and how this page was built

Compiled from OECD tractor test report 1959; and Traktorenlexikon, “John Deere 7510”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. OECD Code 2 test report 2/1 959: John Deere 7510 — Licence not stated by the publisher; facts cited, OECD-1959 · published 2001-06-19 · retrieved 2026-09-14. OECD. Original document
  2. Traktorenlexikon: John Deere 7510 — CC BY-SA 4.0, WIKIBOOKS-TL-106379 · revision 877932. Wikibooks contributors (Traktorenlexikon). Original document