7 material differences · fewer than 12
Tractor oneFendt 313 Variofrom 2012No measured PTO figureTractor twoJohn Deere 75101999–2002115.1 hpMeasured at the PTO · OECD Test 1959
Which should you choose?
Read our verdict on the 313 Vario and the 7510 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | 313 Vario | 7510 | Gap |
|---|---|---|---|
| Measured performance | |||
| PTO power, measured measured | — | 115.1 hp | — |
| Drawbar power, measured measured | — | 106.1 hp | — |
| Engine | |||
| Engine declared | — | John Deere 6.068 TRW-70 | — |
| Displacement declared | — | 6.79 L | — |
| Maximum torque declared | — | 395 lb·ft · 535.0 N·m | — |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Closed centre | — |
| Hydraulic control declared | Load sensing | Load sensing | — |
| Pump flow declared | — | 26.7 gpm · 101.1 L/min | — |
| Pressure declared | — | 2,538 psi · 175 bar | — |
| Rear PTO speeds declared | — | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 9,811 lb · 4,450 kg | 12,928–13,289 lb · 5,864–6,028 kg | differs |
| Maximum permissible mass declared | 18,739 lb · 8,500 kg | — | — |
| Wheelbase declared | 95.3 in · 2,420 mm | 103.3–111.8 in · 2,625–2,840 mm | differs |
| Length declared | 163.4 in · 4,150 mm | 174.6 in · 4,435 mm | +7% 7510 |
| Width declared | 93.9 in · 2,385 mm | 110.6–118.7 in · 2,808–3,015 mm | differs |
| Ground clearance declared | 20.1 in · 510 mm | 14.2–15.7 in · 360–400 mm | differs |
| Turning radius, braked declared | 12.8 ft · 3.90 m | — | — |
| Fuel tank declared | 221.9 qt · 210 L | 199.7 qt · 189.0 L | +11% 313 Vario |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt 313 Vario sources
- Source: Traktorenlexikon, “Fendt 313 Vario”
John Deere 7510 sources
- Source: OECD test report 1959, 2001
- Source: Traktorenlexikon, “John Deere 7510”