Case-IH MXU 110 vs John Deere 7510

12 material differences

Tractor one

2004–2006

114.4 hp

Measured at the PTO · OECD Test 2240

Tractor two

1999–2002

115.1 hp

Measured at the PTO · OECD Test 1959

Which should you choose?

Read our verdict on the MXU 110 and the 7510 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 5 fields identical or within 5%, which is not counted as material

Case-IH MXU 110 and John Deere 7510, field by field
Field	MXU 110	7510	Gap
Measured performance
PTO power, measured measured	114.4 hp	115.1 hp	—
Drawbar power, measured measured	97.9 hp	106.1 hp	+8% 7510
Engine
Engine power, claimed claimed	108.5 hp	—	—
Engine declared	CNH F4DE0484A*D	John Deere 6.068 TRW-70	differs
Displacement declared	4.49 L	6.79 L	+51% 7510
Maximum torque declared	370 lb·ft · 501 N·m	395 lb·ft · 535.0 N·m	+7% 7510
Transmission
Top speed declared	24.9–31.1 mph · 40–50 km/h	18.6–24.9 mph · 30–40 km/h	differs
Hydraulics & hitch
Hydraulic centre declared	Closed centre	Closed centre	—
Hydraulic control declared	—	Load sensing	—
Pump flow declared	22.0 gpm · 83.3 L/min	26.7 gpm · 101.1 L/min	+21% 7510
Pressure declared	2,466 psi · 170 bar	2,538 psi · 175 bar	—
Rear PTO speeds declared	540E/540/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	11,438 lb · 5,188 kg	12,928–13,289 lb · 5,864–6,028 kg	differs
Maximum permissible mass declared	16,535 lb · 7,500 kg	—	—
Wheelbase declared	95.0 in · 2,412 mm	103.3–111.8 in · 2,625–2,840 mm	differs
Length declared	167.9 in · 4,265 mm	174.6 in · 4,435 mm	—
Width declared	100.4 in · 2,550 mm	110.6 in · 2,808 mm	+10% 7510
Height declared	112.6 in · 2,860 mm	113.4 in · 2,880 mm	—
Ground clearance declared	14.0 in · 356 mm	14.2–15.7 in · 360–400 mm	differs
Turning radius, braked declared	13.3 ft · 4.04 m	—	—
Fuel tank declared	187.0 qt · 177.0 L	199.7 qt · 189.0 L	+7% 7510

Source

Source